Academic Staff Roster includes academic activity information for 2017 and before; therefore the visible titles of faculty members may not be up to date. Academic activity information for 2018 and onwards can be tracked through AVESIS (Academic Data Management System).

Prof.Dr. CEVDET KAYNAK
FACULTY OF ENGINEERING
PublicationsResearchMembership & Awards
E-mail :  
Url :  http://users.metu.edu.tr/ckaynak
Phone :  +90312210 5920
Fax :  
Address :
 

Education

  Bachelor's, Middle East Technical University, Metallurgical & Materials Eng.
  Master's, Middle East Technical University, Metallurgical & Materials Eng.
  Doctorate, Middle East Technical University, Metallurgical & Materials Eng.

Publications (INTERNATIONAL)

Journal Papers

  A.1 Kaynak,C., Ankara,A.,, Short Fatigue Crack Growth in Al 2024-T3 and Al 7075-T6. "Engineering Fracture Mechanics", 43, (1992), p.769-778.
  A.2 Kaynak,C., Ankara,A., Baker,T.J.,, A Comparison of Short and Long Fatigue Crack Growth in Steel. "International Journal of Fatigue", 18, (1996), p.17-23.
  A.3 Kaynak,C., Ankara,A., Baker,T.J.,, Inclusion Induced Anisotropy of Short Fatigue Crack Growth in Steel. "Materials Science and Technology", 12, (1996), p.557-562.
  A.4 Kaynak,C., Ankara,A., Baker,T.J.,, Initiation and Early Growth of Short Fatigue Cracks at Inclusions. "Materials Science and Technology", 12, (1996), p.421-426.
  A.5 Kaynak,C., Ankara,A., Baker,T.J.,, Effects of Short Cracks on Fatigue Life Calculations. "International Journal of Fatigue", 18, (1996), p.25-31.
  A.6 Sipahi-Sağlam, E., Akovalı, G., Kaynak, C., Yetmez, M. and Akkaş, N., Studies on Epoxy Modified with Recycled Rubber. "Polymer Engineering and Science", 41, (2001), p.514-521.
  A.7 Kaynak, C., Sipahi-Sağlam, E. and Akovalı, G., A Fractographic Study of Recycled Rubber Toughening in Epoxy. "Polymer", 42, (2001), p.4393-4399.
  A.8 Öztürk, A., Kaynak, C. and Tinçer, T., Effects of Liquid Rubber Modification on the Behaviour of Epoxy Resin . "European Polymer Journal", 37, (2001), p.2353-2363.
  A.9 Kaynak, C. and Mat, O., Uniaxial Fatigue Behaviour of Filament-Wound Glass-Fiber /Epoxy Composite Tubes. "Composites Science and Technology", 61, (2001), p.1833-1840.
  A.10 Kaynak, C., Sipahi-Saglam, E. and Akovalı, G., Effects of Scrap Rubber Particles on the Mechanical Behaviour of Epoxy. "International Journal of Polymeric Materials", 51, (2002), p.133-150.
  A.11 Arıkan, A., Kaynak, C. and Tinçer, T., Influences of Liquid Elastomer Additive on the Behaviour of Short Glass Fiber Reinforced Epoxy. "Polymer Composites", 23, (2002), p.790-805.
  A.12 Kaynak, C., Öztürk, A. and Tinçer, T., Flexibility Improvement of Epoxy Resin by Liquid Rubber Modification. "Polymer International", 51, (2002), p.749-756.
  A.13 C. Kaynak, A. Arikan, and T. Tincer, Flexibility Improvement of Short Glass Fiber Reinforced Epoxy by Using a Liquid Elastomer. "Polymer", 44, (2003), p.2433-2439.
  A.14 C. Kaynak, C. Celikbilek, and G. Akovali, Use of Silane Coupling Agents to Improve Epoxy-Rubber Interface. "European Polymer Journal", 39, (2003), p.1125-1132.
  A.15 C. Celikbilek, G. Akovali, and C. Kaynak, Modification of Epoxy by a Liquid Elastomer and Solid Rubber Particles . "Polymer Bulletin", 51, (2004), p.429-435.
  A.16 Y.O. Kas and C. Kaynak, Ultrasonic (C-scan) and Microscopic Evaluation of Resin Transfer Molded Epoxy Composite Plates. "Polymer Testing", 24, (2005), p.114-120.
  A.17 C. Kaynak, E.S. Erdiller, L. Parnas and F. Senel, Use of Split-Disk Tests For The Process Parameters of Filament Wound Epoxy Composite Tubes. "Polymer Testing", 24, (2005), p.648-655.
  A.18 C. Kaynak, O. Orgun, and T. Tincer, Matrix and Interface Modification of Short Carbon Fiber Reinforced Epoxy. "Polymer Testing", 24, (2005), p.455-462.
  A.19 C. Kaynak and S. Boylu, Effects of SiC Particulates on the Fatigue Behaviour of an Al-Alloy Matrix Composite. "Materials & Design", 27, (2006), p.776-782.
  A.20 C. Kaynak and Y.O. Kas, Effects of Injection Pressure in Resin Transfer Moulding (RTM) of Woven Carbon Fiber/Epoxy Composites. "Polymers & Polymer Composites", 14, (2006), p.55-64.
  A.21 C. Kaynak and C.C. Tasan, Effects of Production Parameters on the Structure of Resol Type Phenolic Resin / Layered Silicate Nanocomposites. "European Polymer Journal", 42, (2006), p.1908-1921.
  A.22 C. Kaynak and O. Cagatay, Rubber Toughening of Phenolic Resin by Using Nitrile Rubber and Amino Silane. "Polymer Testing", 25, (2006), p.296-305.
  A.23 C. Kaynak, E. Akgul and N.A. Isitman, Effects of RTM Mold Temperature and Vacuum On the Mechanical Properties of Epoxy/Glass Fiber Composite Plates. "Journal of Composite Materials", 42, (2008), p.1505-1521.
  A.24 M. Aykol, N.A. Isitman, E. Firlar and C. Kaynak, Strength of Short Fiber Reinforced Polymers: Effect of Fiber Length Distribution. "Polymer Composites", 29, (2008), p.644-648.
  A.25 N.A. Isitman , H.O. Gunduz and C. Kaynak, Nanoclay Synergy in Flame Retarded / Glass Fiber Reinforced Polyamide 6. "Polymer Degradation and Stability", 94, (2009), p.2241 -2250.
  A.26 H.O. Gunduz, N.A. Isitman, M. Aykol, and C. Kaynak, Interfacial Interactions and Flammability of Flame Retarded and Short Fiber Reinforced Polyamides. "Polymer-Plastics Technology and Engineering", 48, (2009), p.1046 -1054.
  A.27 C. Tasan and C. Kaynak, Mechanical Performance of Resol Type Phenolic Resin / Layered Silicate Nanocomposites. "Polymer Composites", 30, (2009), p.343 -350.
  A.28 C. Kaynak, G.I. Nakas and N.A. Isitman, Mechanical Properties, Flammability and Char Morphology of Epoxy Resin / Montmorillonite Nanocomposites. "Applied Clay Science", 46, (2009), p.319 -324.
  A.29 G.I. Nakas and C. Kaynak, Use of Different Alkylammonium Salts in Clay Surface Modification for Epoxy-Based Nanocomposites. "Polymer Composites", 30, (2009), p.357 -363.
  A.30 N.A. Isitman , H.O. Gunduz and C. Kaynak, Halogen-Free Flame Retardants That Outperform Halogenated Counterparts in Glass Fiber Reinforced Polyamides. "Journal of Fire Sciences", 28, (2010), p.87-100.
  A.31 N.A. Isitman and C. Kaynak, Tailored Flame Retardancy via Nanofiller Dispersion State: Synergistic Action Between a Conventional Flame-Retardant and Nanoclay in High-Impact Polystyrene. "Polymer Degradation and Stability", 95, (2010), p.1759-1768.
  A.32 N.A. Isitman, M. Aykol, G. Ozkoc, G. Bayram, and C. Kaynak, Interfacial Strength in Short Glass Fiber Reinforced Acrylonitrile-Butadiene-Styrene / Polyamide 6 Blends. "Polymer Composites", 31, (2010), p.392-398.
  A.33 C. Kaynak, H.O. Gunduz and N.A. Isitman, Use of Nanoclay as an Environmentally Friendly Flame Retardant Synergist in Polyamide-6. "Journal of Nanoscience and Nanotechnology", 10, (2010), p.7374-7377.
  A.34 N.A. Isitman and C. Kaynak, Nanoclay and Carbon Nanotubes as Potential Synergists of an Organophosphorus Flame-Retardant in Poly(Methyl Methacrylate. "Polymer Degradation and Stability", 95, (2010), p.1523-1532.
  A.35 N.A. Isitman, M. Aykol, and C. Kaynak, Nanoclay Assisted Strengthening of the Fiber/Matrix Interface in Functionally Filled Polyamid 6 Composites. "Composite Structures", 92, (2010), p.2181-2186.
  A.36 N.A. Isitman and C. Kaynak, Nanostructure of Montmorillonite Barrier Layers: A New Insight into the Mechanism of Flammability Reduction in Polymer Nanocomposites. "Polymer Degradation and Stability", 96, (2011), p.2284-2289.
  A.37 C. Kaynak and N.A. Isitman, Synergistic Fire Retardancy of Colemanite, a Natural Hydrated Calcium Borate, in High-Impact Polystyrene Containing Brominated Epoxy and Antimony Oxide. "Polymer Degradation and Stability", 96, (2011), p.798-807.
  A.38 N.A. Isitman, M. Dogan, E. Bayramli, C. Kaynak, Fire Retardant Properties of Intumescent Polypropylene Composites Filled with Calcium Carbonate. "Polymer Engineering & Science", 51, (2011), p.875-883.
  A.39 T. Orhan, N.A. Isitman, J. Hacaloglu and C. Kaynak, Thermal Degradation Mechanisms of Aluminium Phosphinate, Melamine Polyphosphate and Zinc Borate in Poly(Methyl Methacrylate). "Polymer Degradation and Stability", 96, (2011), p.1780-1787.
  A.40 N.A. Isitman, M. Aykol, and C. Kaynak, Interactions at Fiber/Matrix Interface in Short Fiber Reinforced Amorphous Thermoplastic Composites Modified with Micro- and Nano-Fillers. "Journal of Materials Science", 47, (2012), p.702-710.
  A.41 N.A. Isitman, B.M. Sipahioglu and C. Kaynak, Nanomorphology and Fire Behaviour of Polystyrene/Organoclay Nanocomposites Containing Brominated Epoxy and Antimony Oxide. "Polymers for Advanced Technologies", 23, (2012), p.984-991.
  A.42 H. Balakrishnan, A. Hassan, N.A. Isitman, and C. Kaynak, On the Use of Magnesium Hydroxide Towards Halogen-Free Flame-Retarded Polyamide-6/Polypropylene Blends. "Polymer Degradation and Stability", 97, (2012), p.1447-145.
  A.43 N.A. Isitman, M. Dogan, E. Bayramli, and C. Kaynak, The Role of Nanoparticle Geometry in Flame Retardancy of Polylactide Nanocomposites Containing Aluminium Phosphinate. "Polymer Degradation and Stability", 97, (2012), p.1285-1296.
  A.44 A.C. Ozkaraca and C. Kaynak, Contribution of Nanoclays to the Performance of Traditional Flame Retardants in ABS. "Polymer Composites", 33, (2012), p.420-429.
  A.45 T. Orhan, N.A. Isitman, J. Hacaloglu and C. Kaynak, Thermal Degradation Mechanism of Organophosphorus Flame-Retardant Poly(methyl methacrylate) Nanocomposites Containing Nanoclay and Carbon Nanotubes. "Polymer Degradation and Stability", 97, (2012), p.273-280.
  A.46 N.A. Isitman and C. Kaynak, Effect of Partial Substitution of Aluminum Hydroxide With Colemanite in Fire Retarded Low-density Polyethylene. "Journal of Fire Sciences", 31, (2013), p.73-84.
  A.47 C. Kaynak and A.C. Ozkaraca, Use of Zinc Borate as the Third Component of a Traditional Brominated Flame Retardant System in Acrylonitrile Butadiene Styrene. "Fire and Materials", 37, (2013), p.491-502.
  A.48 C. Kaynak and B.M. Sipahioglu, Effects of Nanoclays on the Flammability of Polystyrene with Triphenyl Phosphate Based Flame Retardants. "Journal of Fire Sciences", 31, (2013), p.339-355.
  A.49 S. Sankal and C. Kaynak, Using Various Techniques to Characterize Oxidative Functionalized and Aminosilanized Carbon Nanotubes for Polyamide Matrix. "Journal of Reinforced Plastics and Composites", 32, (2013), p.75-86.
  A.50 A.R. Erdogan, I. Kaygusuz and C. Kaynak, Influences of Aminosilanization of Halloysite Nanotubes on the Mechanical Properties of Polyamide-6 Nanocomposites. "Polymer Composites", 35, (2014), p.1350-1361.
  A.51 C. Kaynak and S. Sankal, Effects of Oxidative Functionalized and Aminosilanized Carbon Nanotubes on the Crystallization Behaviour of Polyamide-6 Nanocomposites. "Polymer Bulletin", 71, (2014), p.855-873.
  A.52 C. Kaynak and E. Ibibikcan, Contribution of Nanoclays to the Flame Retardancy of Polyethylene-Based Cable Insulation Materials with Aluminum Hydroxide and Zinc Borate. "Journal of Fire Sciences", 32, (2014), p.121-144.
  A.53 C. Kaynak and Y. Meyva, Use of Maleic Anhydride Compatibilization to Improve Toughness and Other Properties of Polylactide Blended with Thermoplastic Elastomers. "Polymers for Advanced Technologies", 25, (2014), p.1622-1632.
  A.54 E. Ibibikcan and C. Kaynak, Usability of Three Boron Compounds for Enhancement of Flame Retardancy in Polyethylene-Based Cable Insulation Materials. "Journal of Fire Sciences", 32, (2014), p.99-120.
  A.55 Y. Meyva and C. Kaynak, Toughening of Polylactide by Bio-based and Petroleum-based Thermoplastic Elastomers. "International Polymer Processing", 30, (2015), p.593-602.
  A.56 I. Kaygusuz and C. Kaynak, Influences of Halloysite Nanotubes on Crystallisation Behaviour of Polylactide. "Plastics, Rubber and Composites: Macromolecular Engineering", 44, (2015), p.41-49.
  A.57 C. Kaynak and O. Polat, Influences of Nanoclays on the Flame Retardancy of Fiber Filled and Unfilled Polyamide-6 with and without Aluminum Diethylphosphinate. "Journal of Fire Sciences", 33, (2015), p.87-112.
  A.58 C. Kaynak and S. Sankal, Effects of Oxidative Functionalization and Aminosilanization of Carbon Nanotubes on the Mechanical and Thermal Properties of Polyamide-6 Nanocomposites. "Journal of Thermoplastic Composite Materials", 28, (2015), p.1321-1333.
  A.59 Y. Meyva and C. Kaynak, Influences of Three Different Ethylene Copolymers on the Toughness and other Properties of Polylactide. "Plastics, Rubber and Composites: Macromolecular Engineering", 45, (2016), p.189-198.
  A.60 C. Kaynak and B. Sari, Accelerated Weathering Performance of Polylactide and its Montmorillonite Nanocomposite. "Applied Clay Science", 121, (2016), p.86-94.
  A.61 H. Kaya, E. Ozdemir, C. Kaynak and J. Hacaloglu, Effects of Nanoparticles on Thermal Degradation of Polylactide/Aluminium Diethylphosphinate Composites. "Journal of Analytical and Applied Pyrolysis", 118, (2016), p.115-122.
  A.62 C. Kaynak and A.R. Erdogan, Mechanical and Thermal Properties of Polylactide/Talc Microcomposites: Before and After Accelerated Weathering. "Polymers for Advanced Technologies", 27, (2016), p.812-822.
  A.63 H. Kaya, C. Kaynak and J. Hacaloglu, Thermal Degradation of Polystyrene Composites. Part II. The Effect of Nanoclay. "Journal of Analytical and Applied Pyrolysis", 120, (2016), p.194-199.
  A.64 D. Doganay, S. Coskun, C. Kaynak and H. E. Unalan, Electrical, Mechanical and Thermal Properties of Aligned Silver Nanowire/Polylactide Nanocomposite Films. "Composites: Part B - Engineering", 99, (2016), p.288-296.
  A.65 C. Kaynak and B. Dogu, Effects of Accelerated Weathering in Polylactide Biocomposites Reinforced with Microcrystalline Cellulose. "International Polymer Processing", 31, (2016), p.410-422.
  A.66 B. Sari and C. Kaynak, Effects of Montmorillonite Content and Maleic Anhydride Compatibilization on the Mechanical Behavior of Polylactide Nanocomposites. "International Polymer Processing", 31, (2016), p.454-462.
  A.67 O. Polat and C. Kaynak, Use of Boron Oxide and Boric Acid to Improve Flame Retardancy of an Organophosphorus Compound in Neat and Fiber Reinforced Polyamide-6. "Journal of Vinyl and Additive Technology", 22, (2016), p.300-310.
  A.68 C. Kaynak and I. Kaygusuz, Consequences of Accelerated Weathering in Polylactide Nanocomposites Reinforced with Halloysite Nanotubes. "Journal of Composite Materials", 50, (2016), p.365-375.
  A.69 B. Dogu and C. Kaynak, Behavior of Polylactide/Microcrystalline Cellulose Biocomposites: Effects of Filler Content and Interfacial Compatibilization. "Cellulose", 23, (2016), p.611-622.
  A.70 S. Ertan, C. Kaynak and A. Cihaner,, A Platform to Synthesize a Soluble Poly(3,4-Ethylenedioxythiophene) Analogue. "Journal of Polymer Science, Part A: Polymer Chemistry", 55, (2017), p.3935-3941.
 

Conference Papers

  A.1 Kaynak, C. and Ankara, A., Growth of Short Fatigue Cracks in 7075-T6 Aluminum Alloy. "Short-Crack Growth in Various Aircraft Materials", (1990), p.9.1- 9.8.
  A.2 Kaynak,C., Ankara,A.,, Short Fatigue Crack Behaviour in Al 2024-T3. "3rd International Conference on Aluminum Alloys (ICAA3)", 1, (1992), p.604-609.
  A.3 Kaynak,C., Ankara,A.,, SEM Fractography of Fracture Surfaces with Elongated Inclusions. "13th International Congress on Electron Microscopy", 2A, (1994), p.49-50.
  A.4 Kaynak,C., Ankara,A., Baker,T.J.,, Kisa Yorulma Çatlaklarinin Çeliklerdeki Kalintilardan Baslama ve Büyüme Davranislari. "8th International Metallurgy and Materials Congress", 1, (1995), p.711-716.
  A.5 Kaynak,C., Ankara,A., Baker,T.J.,, Kisa ve Uzun Yorulma Çatlaklarinin Çelikteki Farkli Büyüme Davranislari. "9th International Metallurgy and Materials Congress", 1, (1997), p.701-706.
  A.6 Kaynak,C., Ankara,A.,, Short Fatigue Crack Initiation at Inclusions. "5th European Conferance on Advanced Materials and Proceses and Applications (EUROMAT'97)", 1, (1997), p.45-48.
  A.7 Kaynak, C. and Ankara, A., Behaviour of Short Fatigue Cracks in a Steel with Elongated Inclusions. "European Conference - Junior Euromat'98", (1998), p.138-139.
  A.8 Kaynak, C., Short Fatigue Crack Problem in a Steel. "6th European Cong.on Adv.Materials and Processes: Materials for Transportation Technology/Automotive", 1, (1999), p.1-6.
  A.9 Mat, O. and Kaynak, C., Fatigue Behaviour of Filament Wound Composite Tubes under Axial Loading. "10th International Metallurgy and Materials Congress, METALLURGY and MATERIALS 2000", 2, (2000), p.1085-1092.
  A.10 Sipahi-Sağlam, E., Kaynak, C. and Akovalı, G., Interface Studies between Epoxy and Recycled Rubber. "3rd International Conference on Micro Materials, MICROMAT 2000", (2000), p.413-416.
  A.11 Sipahi-Sağlam, E., Akovalı, G. and Kaynak, C., Recycled Rubber Modification of Epoxy. "10th International Metallurgy and Materials Congress, METALLURGY and MATERIALS 2000", 3, (2000), p.1909-1916.
  A.12 Kaynak, C., Öztürk, A. and Tinçer, T., Studies on Epoxy Resin Used in Fiber Reinforced Polymer Composites. "Automotive and Transportation Technology, Congress & Exhibition, ATTCE'01", 4, (2001), p.145-152.
  A.13 Arıkan, A., Kaynak, C. and Tinçer, T., A Fractographic Study of Short Glass Fiber Reinforced Epoxy Modified With Liquid Rubber. "5th International Fracture Conference", (2001), p.245-251.
  A.14 Öztürk, A., Kaynak, C. and Tinçer, T., Behaviour of Epoxy Resin Modified With Liquid Rubber. "2nd Eastern Mediterranian Chemical Engineering Conference, EMCC2", (2001), p.207.
  A.15 Mat, O. and Kaynak, C., Damage Mechanisms of Glass Fiber Wound EpoxyComposite Tubes Under Axial Cyclic Loading. "5th International Fracture Conference", (2001), p.151-157.
  A.16 Özturk, A., Kaynak, C. and Tinçer, T., Flexibility Improvement of an Epoxy Resin Used in Fiber Reinforced Composites. "Polychar World Forum on Polymer Applications and Theory, POLYCHAR-9", (2001), p.22.
  A.17 C. Celikbilek, G. Akovali , C. Kaynak, Studies to Increase the Toughness of Epoxy Matrices. "Proceedings of the Polymer Processing Society 2001 Regional Meeting, PPS-2001,", (2001), p.583.
  A.18 Arıkan, A., Kaynak, C. and Tinçer, T., Behaviour of Short Glass Fiber Reinforced Epoxy Resin Modified With Liquid Rubber. "2nd Eastern Mediterranian Chemical Engineering Conference", (2001), p.231.
  A.19 Kaynak, C., Arıkan, A. and Tinçer, T., Effects of Liquid Rubber Modification on the Flexibility of Fiber Reinforced Epoxy Composites. "Annual Technical Conference of Society of Plastics Engineers, ANTEC 2002", 2, (2002), p.2125-2129.
  A.20 S. Boylu, C. Kaynak, and A. Kalkanli, Fatigue Behaviour of Aluminum Matrix SiC Particulate Reinforced Composites. "Proceedings of the 6th International Fracture Conference", (2003), p.339-345.
  A.21 C. Kaynak, C. Celikbilek, and G. Akovali, Effects of Recyced Car Tyre Rubber Particles on the Mechanical Behaviour of Epoxy. "Proceedings of the 24th International SAMPE Europe Conference", (2003), p.179-186.
  A.22 C. Kaynak, O. Orgun, and T. Tincer, SEM fractography of short carbon fiber/ epoxy matrix composites. "Proceedings of the 13th European Microscopy Congress EMC 2004", 2, (2004), p.81-82.
  A.23 C. Tasan and C. Kaynak, Productıon and Characterizaiıon of Resol / Layered Silicate Nanocomposites. "Proc. of the International Symposium of Research Students on Materials Sci. and Eng. ISRS 2004", (2004), p.10 pages on CD.
  A.24 C. Kaynak and Y.O. Kas, Influences of RTM Injection Pressure on the Production of Carbon Fiber/Epoxy Composites. "European Congress on Advanced Materials and Processes (EUROMAT 2005)", (2005), p.1 page on CD.
  A.25 C. Kaynak, O. Orgun, and T. Tincer, Modification of Epoxy With Short Carbon Fibers and HTPB Rubber. "Proceedings of the European Polymer Congress 2005 (EPF 2005)", (2005), p.3 pages on CD.
  A.26 C.C. Tasan and C. Kaynak, Fenol Formaldehit / Tabakalı Kil Nanokompozit Malzemelerinin Üretilmesi ve Mekanik Davranışları. "Proceedings of the 12th International Metallurgy-Materials Congress (IMMC 2005)", (2005), p.8 pages on CD.
  A.27 G.I. Nakas and C. Kaynak, Polimer Bazlı Nanokompozitlerde Kullanılan Katmanlı Silikatların Yüzey Modifikasyonu. "e-Proceedings of the 13th International Metallurgy-Materials Congress, IMMC 2006 Istanbul", (2006), p.8 pages on CD.
  A.28 C. Kaynak and O. Cagatay, Effects of Nitrile Rubber and Amino Silane on the Toughening of Phenolic Resin. "Abstract Book of the 1st European Chemistry Congress - EuCheMS 2006 , Budapest, Hungary", (2006), p.282.
  A.29 C. Kaynak and C.C. Tasan, Synthesis of Resol Type Phenolic Resin / Layered Silicate Nanocomposites. "Abstract Proceedings of the IUPAC and ACS Conference on Macromolecules - IUMACRO 2007", (2007), p.W-33.
  A.30 E.Akgul and C. Kaynak, Influences of Mold Temperature and Vacuum on the Resin Transfer Molded Polymer Composite Plates. "4th International Conference on Chemical and Environmental Engineering - ICEE 2008", (2008), p.9 pages on CD.
  A.31 C. Kaynak and G.I. Nakas, Effects of Clay Surface Modification in Epoxy Nanocomposites. "17th International Conference on Processing and Fabrication of Advance Materials - PFAM XVII", 2, (2008), p.530-537.
  A.32 N. A. Isıtman, C. Kaynak and H. O. Gunduz, Flame Retardancy of Polyamid 6 and 6.6. "Book of Abstracts of the European Polymer Congress – EPF 2009", (2009), p.198.
  A.33 N. A. Isıtman, C. Kaynak and M. Aykol, Applied Interfacial Strength Estimations in Reinforced Polymers. "e-Proceedings of the 15th International Conference on Composite Structures – ICCS 15", (2009), p.2 pages on CD.
  A.34 H. O. Gunduz, N. A. Isıtman and C. Kaynak, Use of Nanoclays as an Environmentally Friendly Flame Retardant Synergist in Polyamide. "Book of Abstracts of the International Conference on Nanoscience and Technology – ChinaNANO 20", (2009), p.36.
  A.35 N. A. Isıtman and C. Kaynak, Tailored Flame Retardancy via Nano - filler Dispersion State: Nanomorphology and Reaction to Fire of High - impact Polystyrene/Aluminum Tri - Hydroxide/Organoclay Nanocomposites. "Book of Abstracts of the Materials Research Society MRS 2010 Fall Meeting", (2010), p.1 page on CD.
  A.36 N. A. Isıtman and C. Kaynak, Tailoring The Interfacial Properties and Flame Retardancy of Polymer/Short-Fiber Composites Through a Reinforcement at Nano-Scale. "Book of Abstracts of the 14th European Conference on Composite Materials", (2010), p.1 page on CD.
  A.37 N. A. Isıtman and C. Kaynak, Do Filler Nanoparticles Always Act as Synergists in Flame Retardant Polymers? Investigations on Potentials of Functionally - filled Novel Polymer Nanocomposites. "Book of Abstracts of the Materials Research Society MRS 2010 Fall Meeting", (2010), p.1 page on CD.
  A.38 C. Kaynak and N. A. Isıtman, Effects of Nanoclays and Carbon Nanotubes on the Flame Retardancy of Poly(methyl methacrylate). "Book of Abstracts of the 10th International Conference on Nanostructured Materials – NANO 2010", (2010), p.190.
  A.39 H. O. Gunduz, N. A. Isıtman and C. Kaynak, Influences of Nanoclays on the Flammability Behaviour of Polyamide Compounds. "Book of Abstracts of the 7th International Conference on Nanosciences & Nanotechnologies – NN 2010", (2010).
  A.40 A. C. Ozkaraca and C. Kaynak, Flammability of Recycled Polyethylene Terephthalate with Boron Compounds and Two Traditional Flame Retardants. "17 th International Symposium on Boron, Borides and Related Materials ISBB 2011", (2011), p.148-148.
  A.41 A. C. Ozkaraca and C. Kaynak, Use of Montmorillonite with Traditional Flame Retardants in Acrylonitrile Butadiene Styrene by Nanocomposite Approach. "European Clay Conference EUROCLAY 2011", (2011), p.206-207.
  A.42 E. Ibibikcan, M. H. Demirhan and C. Kaynak, Flammability of Low Density Polyethylene with Boron Compounds and Aluminum Hydroxide. "17 th International Symposium on Boron, Borides and Related Materials ISBB 2011", (2011), p.150-150.
  A.43 C. Kaynak and N.A. Isitman, Flame Retardancy Synergism by Using Aluminum Tri-Hydroxide (ATH) and Nanoclay in High-Impact Polystyrene (HIPS). "SPE Society of Plastics Engineers ASIATEC 2011 Conference", (2011), p.2 pages on CD.
  A.44 N. A. Isitman, F. Unlu and C. Kaynak, Use of Colemanite as a Synergistic Fire Retardant Additive in High Impact Polystyrene/Brominated Epoxy Oligomer/Antimony Oxide Compounds. "17 th International Symposium on Boron, Borides and Related Materials ISBB 2011", (2011), p.149-149.
  A.45 O. Polat, Y. İnal and C. Kaynak, Synergistic Effects of Boron Compounds on the Flammability of Polyamide-6 with Organophosphorus Flame Retardant. "17 th International Symposium on Boron, Borides and Related Materials ISBB 2011", (2011), p.131-131.
  A.46 C. Kaynak and A. C. Ozkaraca, Using Micro- and Nano-Composite Approaches to Improve Flame Retardancy of ABS . "Proceedings of the 15th European Conference on Composite Materials – ECCM 15", (2012), p.6 pages on USB.
  A.47 C. Kaynak and S. Sankal, Influences of Silanized Carbon Nanotubes on the Properties of Polyamide Nanocomposites. "Abstracts of the Annual World Conference on Carbon – Carbon 2013 , Rio de Janeiro (14-19 July 2013)", (2013), p.2 pages on CD.
  A.48 Y. Meyva and C. Kaynak, Changes in the Thermal and Other Properties of Polylactide by Blending with Thermoplastic Polyurethane. "International Conference on Thermophysical &Mechanical Properties of Advanced Materials-THERMAM 2014", 1, (2014), p.55.
  A.49 C. Kaynak, Y. Meyva, A.R. Erdogan, I. Kaygusuz, Morphological Studies of Polylactide Blends and Composites by Scanning Electron Microscopy. "17th International Conference of Focus on Microscopy – FOM 2014", 1, (2014), p.69.
  A.50 D. Doganay; S. Coskun; C. Kaynak, H.E. Unalan, Electrical Properties of Silver Nanowire/Polylactide Nanocomposite Films. "2015 MRS Fall Meeting & Exhibit , Boston, USA , Symposium H", 1, (2015), p.66.
  A.51 I. Kaygusuz and C. Kaynak, Mechanical and Thermal Behaviour of Polylactide Nanocomposites Reinforced with Halloysite Nanotubes. "6th International Conference on Science and Technology of Composite Materials – COMAT 2015", 1, (2015), p.2.
  A.52 D. Doganay; S. Coskun; H.E. Unalan, C. Kaynak, Effects of Silver Nanowires on the Behavior of Polylactide Nanocomposite Films. "144th Annual Meeting & Exhibition of TMS Society - TMS 2015, Orlando, USA", 1, (2015), p.206.
  A.53 Y. Meyva and C. Kaynak, Effects of Maleic Anhydride Compatibilization on the Toughness and Other Properties of Polylactide Blended with Thermoplastic Elastomers. "8th European Symposium on Biopolymers – ESBP 2015", 1, (2015), p.107.
  A.54 B. Sari and C. Kaynak, Behavior of Polylactide / Montmorillonite Nanocomposites. "Congress Proceedings Book of the 18th International Metallurgy and Materials Congress - IMMC 2016", (2016), p.258-260.
  A.55 C. Kaynak and Y. Meyva, Toughening of Polylactide (PLA) by Blending with Elastomeric Materials” (invited talk). "Energy Materials Nanotechnology – EMN Meeting on Polymer 2016", (2016), p.69-70.
  A.56 Y. Meyva and C. Kaynak, Blending of Polylactide with Different Elastomeric Materials for Toughening. "46th IUPAC World Polymer Congress – MACRO 2016", (2016), p.178.
  A.57 O. Polat and C. Kaynak,, Flame Retardancy Synergism of Zinc Borate and an Organophosphorus Compound in Polyamide and its Composite. "The 2017 International Conference on Materials and Intelligent Manufacturing - ICMIM 2017", (2017), p.68-69.
  A.58 S. Ertan, C. Kaynak, A. Cihaner,, A New Type of Soluble Hybrid Poly(3,4-Ethylenedioxy Thiophene). "The 3rd International Conference on Renewable Energy Technologies – ICRET 2017", (2017), p.20-21.
  A.59 C. Kaynak and B. Sari, Weathering Degradation of Polylactide / Montmorillonite Nanocomposites. "The 14th International Conference on Nanosciences & Nanotechnologies – NN17", (2017), p.83.

Book and Chapter in a Book

  A.1 Akovalı, G. and Kaynak, C., Chapter 2: Constituent Materials. "Handbook of Composite Fabrication", (2001), p.21-56.
  A.2 Kaynak, C. and Akgül, T., Chapter 3: Open Mould Processes. "Handbook of Composite Fabrication", (2001), p.57-85.

Publications (NATIONAL)

 

Journal Papers

  A.1 C. Kaynak, C.C.Taşan, G.İ.Selimoğlu, Katmanlı Silikatlarla Polimer Bazlı Nanokompozit Üretimi. "Bilim ve Teknik", 456, (2006), s.43.
  A.2 N.A. Işıtman ve C. Kaynak, Yangına Direnen Polimerler. "TÜBİTAK Bilim ve Teknik", 2010, (2010), s.92-95.
 

Conference Papers

  A.1 Kaynak,C., Ankara,A., Kisa Yorulma Çatlaklarinin 2024-T3 Aluminyum Alasiminda Büyümesi. "3. Ulusal Kirilma Konferansi", (1991), s.105-119.
  A.2 Kaynak,C., Ankara,A.,, SEM Fractography of Crack Initiation at Inclusions. "12th National Congress on Electron Microscopy (abstracts)", (1995), s.166.
  A.3 Kaynak,C., Ankara,A.,, SEM Fractography of Inclusion Induced Anisotropy in Short Fatigue Crack Growth. "13th National Electron Microscopy Congress", (1997), s.703-708.
  A.4 Kaynak, C., Short Crack Consideration in Fatigue Design. "4. Ulusal Kirilma Konferansi", (1999), s.100-109.
  A.5 Kaynak, C., Çelikbilek, C. and Akovalı, G., Recycling of Car Tyre Rubber Particles in Epoxy. "GAP IV Engineering Congress", 1, (2002), s.266-272.
  A.6 N.A. Işıtman, M. Aykol, C. Kaynak, Elyaf Uzunluğu Dağılımının Kısa Elyaf Takviyeli Polimer Kompozitlerin Teorik Mukavemetine Etkisi. "II.Ulusal Polimer Bilim ve Teknoloji Kongresi ve Sergisi", (2008), s.CD 3 sayfa.
  A.7 E.Akgül, C. Kaynak, N.A. Işıtman, Reçine Aktarım Kalıplaması (RTM) Yönteminde Kalıp Sıcaklığı, Reçine İlk Sıcaklığı ve Vakumun Etkileri. "14th International Metallurgy & Materials Congress - IMMC 2008", (2008), s.8 pages on CD.
  A.8 N. A. Isıtman, G. I. Nakas, C. Kaynak, O-MMT ile Polimer Nanokompozitlerinde Yüksek Alevlenme Dayanimi ve Mekanik Özellikler. "14. Ulusal Kil Sempozyumu – Bildiriler Kitabı", (2009), s.794-800.
  A.9 N. A. Isıtman and C. Kaynak, Kısa Elyaf Takviyeli Polimer Kompozitlerde Elyaf/Matris Arayüzey Mukavemetinin Uygulamalı Olarak Tahmini. "Abstracts Booklet of the 13th International Materials Symposium – IMSP 2010", (2010), s.125.
  A.10 N.A. Işıtman, H. O. Gunduz, B.M. Kuşçuoğlu , C. Kaynak, Yüksek Alevlenme Dayanımlı Polimer Bazlı Karbon-Nanotüp ve Kil Katkılı Nanokompozitler. "Congress Papers e-Book of the 15th International Metallurgy-Materials Congress - IMMC 2010", (2010), s.8 pages on DVD.
  A.11 N.A. Işıtman, C. Kaynak, Polimer/Kil Nanokompozitlerde Nano-Morfoloji ve Nanodağılımın İyileştirilmesi. "9.Ulusal Kimya Mühendisliği Kongresi", (2010), s.CD 4 sayfa.
  A.12 N. A. Isıtman and C. Kaynak, Functionally Filled Polymer Nanocomposites: A Novel Class of Flame-Retardant Materials. "Book of Abstracts of the 6th Nanoscience and Nanotechnology Conference – NANO TR-VI", (2010), s.1 page on CD.
  A.13 N.A. Işıtman, C. Kaynak, Nanokil Yardımıyla Fonksiyonel Katkılı Poliamid-6 Kompozitlerde Elyaf/Matris Arayüzeyinin Güçlendirilmesi. "3.Ulusal Polimer Bilim ve Teknoloji Kongresi ve Sergisi", (2010), s.CD sayfa: 18-26.
  A.14 N.A. Isitman, C. Kaynak, Towards Understanding the Physical Mode of Action of Nanoparticles in Flame-Retarded Polymer Nanocomposites. "Congress Papers e-Book of the 16th International Metallurgy-Materials Congress - IMMC 2012", (2012), s.6 pages on DVD.
  A.15 S. Sankal, C. Kaynak, Oksidatif Fonksiyonelleştirilen ve Aminosilanlanan Karbon Nanotüplerin Poliamid-6 Nanokompozitlerine Etkileri. "4.Ulusal Polimer Bilim ve Teknoloji Kongresi ve Sergisi", (2012), s.1 page on CD.
  A.16 S. Sankal and C. Kaynak, Oxidative Functionalization and Aminosilanization of Carbon Nanotubes for Polymer Nanocomposites. "Abstracts of the 8th Nanoscience and Nanotechnology Congress – NanoTR-VIII", (2012), s.1 page on CD.
  A.17 A.R. Erdogan, I. Kaygusuz, C. Kaynak, A Comparison of the Effects of Modified and Unmodified Halloysite Nanotubes on the Mechanical Behaviour of Polyamide-6. "17th International Metallurgy and Materials Congress - IMMC 2014", 1, (2014), s.7 pages on DVD.
  A.18 B. Sarı, C. Kaynak, Polilaktit/Montmorillonit Nanokompozitlerinin Mekanik ve Isıl Davranışları. "5.Ulusal Polimer Bilim ve Teknoloji Kongresi", 1, (2014), s.78.
  A.19 D. Doganay; S. Coskun; C. Kaynak, H.E. Unalan, Electrical Conductivity of Silver Nanowire/Polylactide Nanocomposite Films. "Uluslararası Katılımlı III. Ege Kompozit Malzemeler Sempozyumu - KompEGE III", 1, (2015), s.4-5.
  A.20 S. Ertan, C. Kaynak, A. Cihaner, A Novel Organic-Inorganic Based Electroactive Copolymer. "28th National Chemistry Congress", (2016), s.418.
  A.21 S. Ertan, C. Kaynak, A. Cihaner, A New Platform to Obtain a Soluble Poly(3,4-Ethylenedioxy Thiophene. "28th National Chemistry Congress", (2016), s.186.
  A.22 Y. Meyva, C. Kaynak, Polilaktitin Farklı Elastomerik Malzemelerle Toklaştırma Amaçlı Harmanlanması. "6.Ulusal Polimer Bilim ve Teknoloji Kongresi", (2016), s.88.
<< back