Prof.Dr. HULUSİ BÜLENT ERTAN (RETIRED)
FACULTY OF ENGINEERING
PublicationsResearchMembership & Awards
E-mail :  
Url :  -
Phone :  
Fax :  
Address :
 

Education

  Master's, Middle East Technical University, Electric-electronic. Eng.
  Doctorate, The University of Leeds, Electric-electronic. Eng.
  Diploma, Middle East Technical University, Electric-electronic. Eng.

Publications (INTERNATIONAL)

Journal Papers

  A.1 Ertan, H.B., et al. (5), Design Optimisation of Variable Frequency Driven Three-Phase Induction Motors. "COMPEL", 17, (1998), p.135-140.
  A.2 Çadırcı, I., Ermiş, M., Nalçacı, E., Ertan, H.B. and Rahman, M., A Solid State Direct on Line Starter for Medium Voltage Induction Motors with Minimized current and Torque Pulsations. "IEEE Transactions on Energy Conversion", 14, (1999), p.402-412.
  A.3 Ertan, H.B., Prediction of Torque and Inductance Displacement Charecteristics of Asymmetrically Slotted Variable-Reluctance Motors Using a Simplified Model for Numerical Solution. "IEEE Transactions on Magnetics", 35, (1999), p.4247-4258.
  A.4 Şahin, F., Ertan, H.B. and Leblebicioğlu, K., Optimum Geometry for Torque Ripple Minimization of Switched Reluctance Motors. "IEEE Transactions on Energy Conversion", 15, (2000), p.30-40.
  A.5 Ertan, H.B., Can, H. and Akın, E., A New Integration Algorithm for Flux Estimation Using the Voltage Model. "COMPEL", 21, (2002), p.252-261.
  A.6 Ertan, H.B. and Şimşir, N.B., Comparison of PWM and PFM Induction Drives Regarding Audible Noise and Vibration. "IEEE Transactions on Industry Applications", 40, (2004), p.1621-1628.
  A.7 Ertan H. B., Dağ B., Capolino G., Calculation of Parameters of Single Phase PM Motor for Design Optimization. "IEEE Trans on Energy Conversion", 20, (2005), p.538-548.
  A.8 Ertan, H. B., Bayramlı E., Gölgelioğlu Ö.,, Powder Metal Development for Electrical Motor Applications. "Journal of Materials Processing Technology", 161, (2005), p.83-88.
  A.9 Karacan C., Ertan H.B., Evaluation of a Radial Flux - Brushless DC Drive and an Induction Motor Drive for Washing Machine Applications. "Electromotion", (2005), p.133-140.
  A.10 Ires Iskender, Yıldırım Üçtug, H. Bülent Ertan, Steady-state modeling of a phase-shift PWM parallel resonant converter . "The International Journal for Computation and Mathematics", 25, (2006), p.883-899.
  A.11 Ires Iskender, Yildirim Üçtug, H.Bülent Ertan, DSP microcontroller-based fuzzy control of a DC/DC parallel resonant converter using phase-shift PWM technique . "The International Journal for Computation and Mathematics", 25, (2006), p.827-840.
  A.12 Ertan H. B., Leblebicioğlu K., Avenoğlu B., Pirgaip M., High Frequency Loss Calculation in Smooth Rotor Induction Motor Using FEM. "IEEE Trans. on Energy Conversion", 22, (2007), p.566-575.
  A.13 Ozan Keysan and H. Bülent Ertan, Determination of Rotor Slot Number of an Induction Motor Using an External Search Coil. "Facta Universitatis. Series.: Electronics and Energetics. Energ.,", vol. 22,, (2009), p.227-234.
 

Conference Papers

  A.1 Akın, E, Can, H., Ertan, H.B. and Üçtuğ, M.Y., Comparison of Integration Algorithms for Vector Control. "International Conference on Electrical Machines", 3, (1998), p.1626 - 163.
  A.2 Ertan, H.B., Leblebicioğlu, K. and Pirgaip, M., High Frequency Loss Calculation in a Smooth Rotor Induction Motor Using FEM. "International Conference on Electrical Machines", 3, (1998), p.1838 - 184.
  A.3 Leblebicioğlu, K., Ertan, H.B. and Çekic, A., Prediction of Induction Motor Parameters from Numerical Field Solutions. "International Conference on Electrical Machines", 3/3, (1998), p.740-745.
  A.4 Hamarat, S., Leblebicioğlu K. and Ertan, H.B., Comparison of Deterministic and Non-deterministic Optimization Algorithms for Design Optimization of Electrical Machines. "International Conference on Electrical Machines", 3, (1998), p.1477 -1482.
  A.5 Ertan, H.B. and Şimşir, B., A Comparison of PWM and PFM Induction Drives Regarding Audible Noise and Vibration for Household Applications. "International Symposium on Diagnostics for Electrical Machines,Power Electronics and DC Drives", 1, (1999), p.33-40.
  A.6 Şimşir, B. and Ertan, H.B., A Comparison Between the Torque Production Capabilities of Axial Flux and Radial Flux Type of Brushless DC Motors. "Electromotion", 1, (1999), p.125-131.
  A.7 Ertan, H.B. and Şimşir, B., Comparison of Torque Capabilities of Axial Flux and Radial Flux Type of Brushless DC Drives for Wide Speed Range Applications. "IEEE PEDS'99", 2, (1999), p.719-724.
  A.8 Ertan, H.B., Çalıkaya, T. and Demirel, O., Software for Simulation and Controller Development for High Frequency High Voltage Power Supplies. "International Power Electronics and Motion Control Conference", 1, (2000), p.665-670.
  A.9 Ertan, H.B., Leblebicioğlu, K., Özmener, M., Demirel, O. and Bulatov, O., Fuzzy Logic Control Scheme for Mains Synchronized Solar-Electrical Energy Conversion. "PCIM 2000 Power Quality", 1, (2000), p.30-40.
  A.10 Ertan, H.B., Leblebicioğlu, K. and Demirel, O., An Approach to Design Optimization of HV High Frequency Resonant Power Trsnsformers. "International Conference on Electrical Machines", 1, (2000), p.183-187.
  A.11 Can, H., Akın, E., Ertan, H.B. and Akın, M., Evaluation of a Simple Integration Algorithm for Flux Estimation. "IEEE International Aegean Conference on Electrical Machines and Power Electronics", 1, (2001), p.491-496.
  A.12 Ertan, H.B. and Daşdemir, B., An Approach to Analysis and Design of Switched Reluctance Motors. "International Symposium on Electromagnetic Fields", 1, (2001), p.19-34.
  A.13 Ertan, H.B., Bizkevelci, E. and Avenoğlu, B., An Induction Motor Design Tool Combining Analytical and Field Solution Techniques. "IEEE International Conference on Electrical Machines and Systems", CD, (2001).
  A.14 Ertan, H.B., Bizkevelci, E. and Avenoğlu, B., A Design Tool Utilizing Numerical Field Solution and Analytical Design and Optimization Techniques. "IEEE International Aegean Conference on Electrical Machines and Power Electronics", 1, (2001), p.628-633.
  A.15 Ertan, H.B. and Çolak, B., A Study on Improvement of Conducted EMI from A Quasi-Resonant Inverter. "International Conference on Electromagnetic Compatibility", 1, (2002), p.272-277.
  A.16 Ertan, H.B., Dağ, B. and Capolino, G., An Accurate Model for the Calculation of Some Parameters of Single-Phase Permanent Magnet Motors. "International Conference on Electrical Machines", CD, (2002), p.162-168.
  A.17 Ertan, H.B., Dağ, B. and Capolino, G., Calculation of Some Parameters of Single Phase PM Motor for Design Optimization. "International Conference on Optimization of Electrical and Electronic Equipments", (2002), p.351-356.
  A.18 H. Bülent Ertan, Bülent Dağ, Gerard Capolino, Calculation of Parameters of Single Phase PM Motor for Design Optimization. "Proc. Annual conference of Israel Society of Electrical and Electronic Engineers", (2003), p.242-248.
  A.19 H.Bülent Ertan, Erdal. Bizkevelci, Levent B. Yalçıner, Measurement and Calculation of Leakage Inductance and Stray Capacitance of High-Frequency Transformers. "Proc. ELECTROMOTION 2004", 1, (2003), p.120-125.
  A.20 Erdal Bayramlı, Özgür Gölgelioğlu, H. Bülent, Ertan, Powder Metal Development for Electrical Motor Applications. "Proc. Japanese-Medditerranean Workshop on Applied Electromagnetic Engineering", 1, (2003), p.41-45.
  A.21 Barış Çolak, H. Bülent Ertan, A New Technique for Shortening the EMI Filter Design Stage. "Proc. IEEE International Conference on Electromagnetic Compatibility", CD, (2003).
  A.22 H. Bülent Ertan, Kemal Leblebicioğlu, Bülent Avenoğlu, Bahri Ercan, Identification Of Parameters of An Induction Motor From Field Solution. "Proc. of 6th International Conference on Electrical Machines and Systems ICEMS 2003;", 1, (2003), p.I-VI.
  A.23 Yılmaz, A., Ertan, H.B. and Leblebicioğlu,, A Fuzzy Control System for Grid Connected Photovoltaic Energy Conversion. "International Aegean Conference on Electrical Machines and Power Electronics", 1, (2004), p.402-497.
  A.24 Ertan, H.B. and Karacan, C., Evaluation of Radial Flux BLDC and Induction Motor Drive for Washing Machine Applications. "International Conference on Electrical Machines", 1, (2004), p.239-245.
  A.25 Çolak, B. and Ertan, H.B., A Unity Power Factor Induction Cooktop: Design Issues and a Novel Approach to Measurement and Elimination of Conducted EMI. "InternationaAegean Conference on Electrical Machines and Power Electronics Proceedings", 1, (2004), p.146-152.
  A.26 Ertan, H.B., Bizkevelci, E. and Yalçıner, L.B., Measurement and Prediction of Parameters of High Frequency Transformers. "Advanced Research Workshop on Modern Transformers 2004", (2004), p.1-16.
  A.27 Bizkevelci, E., Leblebicioğlu, K. and Ertan, H.B., A Sliding Mode Controller to Minimize SRM Torque Ripple and Noise. "IEEE ISIE 2004", (2004).
  A.28 Ertan H. B., Çolak B.., Design Issues and a Novel Approach for Measurement and Elimination of Conducted EMI for an Induction Cooktop. "ICEMC 2005 International Conference on Electromagnetic Compatibility CD Proceedings", 1, (2005), p.EE1.1.-1.13.
  A.29 Ertan H. B.,Büyükbaş A., Lipo T.., A Model for the Calculation of Core Losses of a Six Phase Induction Motor. "ISEF 2005 International Symposium on Electromagnetic Fields CD Proceedings", 1, (2005).
  A.30 Ertan, H.B., Çağlar, H. Özyurt, Prediction of Induction Motor Parameters from Manufacturer's data. "SIELA 2005 International Symposium on Electrical Apparatus and Technologies CD Proceedings", 1, (2005), p.1.
  A.31 Bizkevelci E, Ertan H. B., Leblebicioğlu K., Effects of Control Parameters on SRM Performance: A Parametric Search. "IEEE ACEMP-ELECTROMOTION International Aegean Confeence on Electrical Machines and Power Electronics", 1, (2007), p.276-281.
  A.32 Ertan H. B., Çolak B., Murat E. I., A Novel Approach to Detection of Some Parameters of Induction Motors. "IEEE International Drives and Machines Conference", (2007), p.1626-1631.
  A.33 Ertan H. B., Çolak B., Murat E. I., A New Off Line Method for Stator Inductance Detection for use in Induction Motor Controllers. "PCIM Europe 2007 (International Conf. on Power Electronics & Intelligent Motion Control)", 1, (2007), p.48-53.
  A.34 Ertan H. B., Çolak B., Sezgin V., Detection of Some Parameters of Induction Motors a Proposal and Its Verification. "IEEE Power Electronics and Drives Conference", (2007), p.1337-1343.
  A.35 Ozan Keysan H. Bülent Ertan, External Search Coil as a Means of Measuring Rotor Speed of an Induction Motor. "ELECTROMOTION 2009, EPE "Electric Drives"", 1, (2009), p.OS-4.
  A.36 Ozan Keysan H. Bülent Ertan, Determination Of Rotor Slot Number Of An Induction Motor Using An External Search Coil. "16th International Symposium on Electrical Apparatus and Technologies SIELA 2009", 1, (2009), p.CD oral ses. 1.
  A.37 Ertan H. B. , Keysan O., Higher Order Rotor Slot Harmonics for Rotor Speed Position Estimation. "12th International Conference on Optimization of Electrical and Electronic Equipment", 1, (2010), p.416-421.
  A.38 Ertan H. B. , Keysan O, Speed Position Estimation by Demodulating Rotor Slot Harmonics. "International Conference on Electrical Machines", 1, (2010), p.978-1-4244-4175.
  A.39 H. Bülent Ertan, Emre Doğru, A proposal for Improving Efficiency of Inverter Driven Electrical Motors. "IEEE PES General Meeting", 1, (2011).
  A.40 H. Bulent Ertan, Kurtuluş Yılmaz, Choice of Pole number of Two-Rotor Axial-Flux PM Motor for Control Moment Gyroscope. "IEEE International ACEMP-ELECTROMOTION joint Conference", 1, (2011).
  A.41 H. B. Erta, E. Dogru, A. Yılmaz, Comparison of efficiency of Two dc to ac converters for grid connected applications. "Optiimization of Electrical and Electronic Equipment", 1, (2012), p.879-886.
  A.42 H. B. Ertan, İ. Şahin, Evaluation of Inductance Measurement Methods for PM machines. "International Conference on Electriical Machines", (2012), p.1672-1678.
  A.43 H. Bülent Ertan, Burak Yalçıner, An approach for the calculation of end-leakage for SR motors. "International Conference on Applied Electromagnetics", 1, (2013).
  A.44 H. Bülent Ertan, Ozan Keysan, Implementation issues of real-time position estimation for induction motors using rotor slot harmonics. "International Conference on Power Engineering Energy and Electrical Drives, IEEE", 1, (2013).
  A.45 Ertan H. B., Çağan N., Outer Rotor Radial-Flux PM Motors for Control Moment Gyroscope Applications. "International Conference on Optimization of Electrical and Electronic Equipment", (2014).
  A.46 Ertan H. B., Çağan N., Comparison of Outer Rotor Radial Flux and Axial Flux PM Motors for CMG Application. "International COnference on Electrical Machines", (2014).
  A.47 Ertan H. B., Şener Y., 3-phase Sinusoidal Output Inverter Topology. "Third International Conference on Power Electronics and Electrical Drives", CD, (2014).
  A.48 Ertan H. B., Şener Y., Sinus Output 3-phase Inverter Toplogy for Improved Drive Efficiency. "International Power Electronics and Motion Control Conference and Exposition", CD, (2014).
  A.49 Rasul Tarvirdilu Asl, Reza Zeinali, H. Bülent Ertan, Yavuz Taner, PM BRUSHED DC MOTOR OPTIMIZATION. "ISEF 2015 - XVII International Symposium on Electromagnetic Fields in Mechatronics, Electrical and", 1, (2015), p.6.
  A.50 Raza Zeinali, H. Bülent Ertan, Evaluation of a 6 pole axial flux PM motor for Control Moment Gyroscope Application,. "International Conf. IEEE ACEMP-OPTIM-ELECTROMOTION", 1, (2015), p.6.
  A.51 A. Hadj Dida, M. Bourahla, H. Bülent Ertan, M. Benghanem , M. E. Benzina, Three phase Inverter Speed Control of AC Drives Motor using DSPic microcontroller. "International Conf. IEEE ACEMP-OPTIM-ELECTROMOTION", 1, (2015), p.6.
  A.52 H. B. Ertan, Yunus Şener, A Novel Boost Type Inverter Topology for Motor Drives. "DAS Conference Development and Application Systems", 1, (2016), p.1-6.
  A.53 H. B. Ertan, Murat Kayhan, Development of a Model for DC Link Filter Design. "IEEE Transportation and Electrification COnference", (2016).

Book and Chapter in a Book

  A.1 Akın, E., Ertan, H.B. and Üçtuğ, Y., Basic Control of Induction Motor Drives. "Modern Electrical Drives", 1, (2000), p.493-519.
  A.2 Ertan, H.B., Switched Reluctance Motors. "Modern Electrical Drives", 1, (2000), p.141-193.
  A.3 H. Bülent Ertan,Erdal Bizkevelci, Levent B Yalçıner, Measurement and Prediction of Parameters of High Frequency transformers. "TRANSFORMERS Analysis, Design and Measurement", (2012), p.461-487.

Publications (NATIONAL)

 

Journal Papers

  A.1 H. B. Ertan, O. Keysan, Asenkron motorlarda oluk sayısının gövde dışına takılan birbobinle belirlenmesi. "EMO Bilimsel Dergi", 2, (2012), s.37-43.
  A.2 H. B. Ertan, Önsöz. "EMO Bilimsel Dergi", 2, (2012), s.iv-vi.
 

Conference Papers

  A.1 Can, H., Akın, E. and Ertan, H.B., Sayısal İşaret İşlemci Kullanılarak Gerçekleştirilen Vektör Kontrolun Performans Değerlendirilmesi. "Elektrik-Elektronik Bilgisayar Mühendisliği 8. Ulusal Kongresi", 1, (1999), s.146-149.
  A.2 H. Bülent Ertan, Bülent Dağ, Gerard Capolino, Monofaze Sabit Mıknatıslı Motorların Bazı Parametrelerinin Tasarım Amacı ile Hesaplanması. "Eletrik-Elektronik Bilgisayar Mühendisliği 10. Ulusal Kongresi", 1, (2003), s.139-143.
  A.3 Erdal Bizkevelci, Kemal Leblebicioğlu, H. Bülent Ertan, A Control Strategy For Noise Reduction In Switched Reluctance Motors. "SAEM, Macedonian Polish Conference on Applied Electromagnetics", 1, (2006), s.1-12.
  A.4 H. Bülent Ertan, Cüneyt Karacan, Levent B. Yalçıner, Evaluation of Switched Reluctance Motor Drives for Wide Speed Range Drive Applictions. "ICEM, International Conference on Electrical Machines", 1, (2006).
  A.5 H. Bülent Ertan, Çağlar Özyurt, Prediction of Motor Speed For Low Cost Induction Motor Drives . "OPTIM, International Conference on Optimization of Electrical and Electronic Equipment", 1, (2006), s.2A.01.
  A.6 Ozan Keysan and H. Bülent Ertan, Gövde Dışında Yerleştirilmiş Bobin İle Asenkron Motor Hızının Ölçülmesi . "EMO 13. Ulusal Kongre", (2009), s.CD.
  A.7 H. Bulent Ertan, K. Yılmaz, Moment Kontrol Jiroskobu için çift rotorlu eksenel akılı motor: kutup sayısı seçimi ve tasarımı. "TOK 2012 Otomatik Kontrol Ulusal Toplantısı", (2012).
  A.8 O. Keysan, H. B. Ertan, Rotor oluk harmonikleri kullanarak asenkron motorlarda gerçek zamanda sensörsüz hız ve konum kestirimi. "ELECO", (2012).
<< back