Academic Staff Roster includes academic activity information for 2017 and before; therefore the visible titles of faculty members may not be up to date. Academic activity information for 2018 and onwards can be tracked through AVESIS (Academic Data Management System).

Prof.Dr. ENDER CİĞEROĞLU
FACULTY OF ENGINEERING
PublicationsResearchMembership & Awards
E-mail :  
Url :  http://www.metu.edu.tr/~ender
Phone :  +90312210 2579
Fax :  
Address :
 

Education

  Bachelor's, Middle East Technical University, Mechanical Eng.
  Master's, Middle East Technical University, Mechanical Eng.
  Master's, The Ohio State University, Mechanical Eng.
  Doctorate, The Ohio State University, Mechanical Eng.

Publications (INTERNATIONAL)

Journal Papers

  A.1 Cigeroglu E, Lu W, Menq CH, One-dimensional Dynamic Microslip Friction Model. "Journal of Sound and Vibration", 292, (2006), p.881-898.
  A.2 Ciğeroğlu E, Özgüven HN, Non-linear Vibration Analysis of Bladed Disks with Dry Friction Dampers. "Journal of Sound and Vibration", 295, (2006), p.1028-1043.
  A.3 Cigeroglu E, An N, Menq CH, A Microslip Friction Model with Normal Load Variation Induced by Normal Motion. "Nonlinear Dynamics", 50, (2007), p.609-626.
  A.4 Cigeroglu E, An N, Menq CH, Forced Response Prediction of Constrained and Unconstrained Structures Coupled Through Frictional Contacts. "Journal of Engineering for Gas Turbines and Power - ASME", 131, (2009).
  A.5 Cigeroglu E, Samandari H., Nonlinear Free Vibration of Double Walled Carbon Nanotubes by Using Describing Function Method with Multiple Trial Functions. "Physica E: Low-dimensional Systems and Nanostructures", 46, (2012), p.160-173.
  A.6 Yümer M.E., Cigeroglu E., Özgüven H.N., Mistuning Identification of Integrally Bladed Disks With Cascaded Optimization and Neural Networks. "Journal of Turbomachinery - ASME", 135, (2013).
  A.7 Okyay A., Cigeroglu E., Baslamisli S.C., A New Sliding-Mode Controller Design Methodology with Derivative Switching Function for Anti-Lock Brake System. "Proceedings of the IMechE, Part C: Journal of Mechanical Engineering Science", 227, (2013), p.2487-2503.
  A.8 Aghazadeh R., Cigeroglu E., Dag S., Static and free vibration analyses of small-scale functionally graded beams possessing a variable length scale parameter using different beam theories. "European Journal of Mechanics-A/Solids", 46, (2014), p.1-11.
  A.9 Cigeroglu E., Samandari H., Nonlinear Free Vibrations of Curved Double Walled Carbon Nanotubes Using Differential Quadrature Method. "Physica E: Low-dimensional Systems and Nanostructures", 64, (2014), p.95-105.
  A.10 M Rahmanian, RD Firouz-Abadi, E Cigeroglu, Free vibrations of moderately thick truncated conical shells filled with quiescent fluid. "Journal of Fluids and Structures", 63, (2016), p.280-301.
  A.11 Rahmanian, M., R. D. Firouz-Abadi, and E. Cigeroglu, Dynamics and stability of conical/cylindrical shells conveying subsonic compressible fluid flows with general boundary conditions. "Journal of Mechanical Sciences", 120, (2016), p.42-61.
  A.12 Rahmanian M., Firouz-Abadi R.D., Cigeroglu E., Dynamics and stability of conical/cylindrical shells conveying subsonic compressible fluid flows with general boundary conditions. "International Journal of Mechanical Sciences", 120, (2017), p.42-61.
  A.13 Aghdam, B. H., Cigeroglu E., Vibration-based tool wear estimation by using non-stationary Functional Series TARMA (FS-TARMA) models. "The International Journal of Advanced Manufacturing Technology", 93, (2017), p.1431-1442.
  A.14 Yigit U., Cigeroglu E., Budak E., Chatter reduction in boring process by using piezoelectric shunt damping with experimental verification. "Mechanical Systems and Signal Processing", 94, (2017), p.312-321.
  A.15 Koyuncu A., Cigeroglu E., Özgüven H.N., Localization and identification of structural nonlinearities using cascaded optimization and neural networks. "Mechanical Systems and Signal Processing", 95, (2017), p.219-238.
  A.16 Ghassabi A.A., Dag S., Cigeroglu E., Free vibration analysis of functionally graded rectangular nanoplates considering spatial variation of the nonlocal parameter. "Archives of Mechanics", 69, (2017), p.105-130.
 

Conference Papers

  A.1 Cigeroglu E, An N, Menq CH, Wedge Damper Modeling and Forced Response Prediction of Frictionally Constrained Blade. "Proceedings of the ASME Turbo Expo 2007", 5, (2007), p.519-528.
  A.2 Cigeroglu E, Reduction of Vibratory Stress of Mechanical Parts by Use of Dry Friction Dampers. "UMTIK2008, 13th International Conference on Machine Design And Production", (2008).
  A.3 Cigeroglu E, Menq CH, A Microslip Friction Model for the Analysis of Frictionally Damped Turbine Blades. "IMECHE 9th International Conference on Vibrations in Rotating Machinery", 1, (2008), p.185-196.
  A.4 Yümer E, Cigeroglu E, Özgüven HN, Mistuning Identification of Bladed Disks Utilizing Neural Networks. "Proceedings of the ASME Turbo Expo 2010", (2010).
  A.5 Boral C, Cigeroglu E, Korkmaz, Effect Of Intentional Dry Friction Damping On The Performance Of An Elastomeric Engine Mount. "ASME 2010 10th Biennial Conference on Engineering Systems Design and Analysis ESDA 2010", (2010).
  A.6 Aydan G, Cigeroglu E, Baslamisli SC, Application of Tuned Mass Dampers and Lever Type Vibration Isolator to the Quarter-Car Model in Order to Increase Ride Comfort. "ASME 2010 10th Biennial Conference on Engineering Systems Design and Analysis ESDA 2010", (2010).
  A.7 Yümer E, Cigeroglu E, Özgüven HN, Non-Linear Forced Response Analysis of Mistuned Bladed Disk Assemblies. "Proceedings of the ASME Turbo Expo 2010", (2010).
  A.8 Okyay A, Cigeroglu E, Baslamisli SC, Sliding-Mode Control Algorithm Devolpment for Anti-lock Braking System. "ASME 2010 10th Biennial Conference on Engineering Systems Design and Analysis ESDA 2010", (2010).
  A.9 Yümer E, Cigeroglu E, Özgüven HN, Robustness Analysis of Intentional Mistuning Patterns in Randomly Mistuned Bladed Disk Assemblies. "USD 2010 International Conference on Uncertainties in Structural Dynamics", (2010).
  A.10 Yümer E, Cigeroglu E, Özgüven HN, Model Updating With Neural Networks and Genetic Optimization. "IMAC XXIX: Conference & Exposition on Structural Dynamics", (2011).
  A.11 Karataş H.Ç., Cigeroglu E., Özgüven H.N., On the comparison of possibilistic and probabilistic methods for the determination of the worst-case response of mistuned bladed disks. "IMECHE 10th International Conference on Vibrations in Rotating Machinery", (2012).
  A.12 Samandari H., Cigeroglu E., Nonlinear Free Vibration Analysis of Double Walled Carbon Nanotubes With A Concentrated-Mass. "UMTIK2012, 15th International Conference on Machine Design And Production", (2012).
  A.13 Karataş H.Ç., Cigeroglu E., Özgüven H.N., Possibilistic Interpretation of Mistuning in Bladed Disks by Fuzzy Algebra. "IMAC XXX: Conference & Exposition on Structural Dynamics", (2012).
  A.14 Samandari H., Cigeroglu E., Effect of Waviness on the Variation of Nonlinear Fundamental Natural Frequency of Single Wall Carbon Nanotube by Using Multiple Harmonic Balance Method. "Space Elevator Conference", (2012).
  A.15 Yılmaz H., Cigeroglu E., Tool Point FRF Calculation For Spindle-Holder-Tool Assembly Using Spinning Timoshenko Beam Theory. "UMTIK2012, 15th International Conference on Machine Design And Production", (2012).
  A.16 Eldoğan Y., Cigeroglu E., Vibration Fatigue Analysis of A Cantilever Beam Exposed to Random Loading. "UMTIK2012, 15th International Conference on Machine Design And Production", (2012).
  A.17 Şengül E., Cigeroglu E., Nonlocal Free Vibration of Single Walled Cantilevered Carbon Nanotubes With A Concentrated Mass Attached At The Tip. "UMTIK2012, 15th International Conference on Machine Design And Production", (2012).
  A.18 Ünlü D., Cigeroglu E., Özgen G.O., Finite Element Model Updating of Aerospace Structures. "UMTIK2012, 15th International Conference on Machine Design And Production", (2012).
  A.19 Erisen Z.E., Cigeroglu E., Frequency Domain Optimization of Dry Friction Dampers on Buildings Under Harmonic Excitation. "IMAC XXX: Conference & Exposition on Structural Dynamics", (2012).
  A.20 Yigit U, Cigeroglu E, Budak E, Chatter Reduction in Turning by Using Piezoelectric Shunt Circuits. "IMAC XXXI: Conference & Exposition on Structural Dynamics, Garden Grove, California, USA", (2013).
  A.21 Sayin B, Cigeroglu E, A New Structural Modification Method With Additional Degrees of Freedom for Dynamic Analysis of Large Systems. "IMAC XXXI: Conference & Exposition on Structural Dynamics, Garden Grove, California, USA", (2013).
  A.22 Eldogan Y, Cigeroglu E, Vibration Fatigue Analysis of a Cantilever Beam Using Different Fatigue Theories. "IMAC XXXI: Conference & Exposition on Structural Dynamics, Garden Grove, California, USA", (2013).
  A.23 Sayin B, Cigeroglu E, Reanalysis of Large Finite Element Models With Structural Nonlinearities. "IMAC XXXI: Conference & Exposition on Structural Dynamics, Garden Grove, California, USA", (2013).
  A.24 Uz C, Özgen GO, Cigeroglu E, Design of a Test Setup for Measuring Dynamic Stiffness of Vibration Isolators. "IMAC XXXI: Conference & Exposition on Structural Dynamics, Garden Grove, California, USA", (2013).
  A.25 Yilmaz H, Cigeroglu E, Effect of Spin Speed on Stability Lobes in High Speed Machining. "IMAC XXXI: Conference & Exposition on Structural Dynamics, Garden Grove, California, USA", (2013).
  A.26 Kozak MT, Yildiz EN, Yazicioglu Y, Cigeroglu E, Effects of Aircraft Aeroelastic Deformations on External Store Separation Dynamics. "ASME 2013 International Mechanical Engineering Congress & Exposition, San Diego, California, USA", (2013).
  A.27 Samandari H, Cigeroglu E, Nonlinear Free Vibration of Curved Double Walled Carbon Nanotubes Using Differential Quadrature Method. "IMAC XXXI: Conference & Exposition on Structural Dynamics, Garden Grove, California, USA", (2013).
  A.28 Koyuncu A, Cigeroglu E, Yümer ME, Özgüven HN, Localization and Identification of Structural Nonlinearities Using Neural Networks. "IMAC XXXI: Conference & Exposition on Structural Dynamics, Garden Grove, California, USA", (2013).
  A.29 Ozturk V. Y. , Cigeroglu E., Özgüven H. N., Optimum profile modifications for the minimization of dynamic transmission error. "International Gear Conference", (2014).
  A.30 Aghazadeh R., Cigeroglu E., Dag S., Strain Gradient Elasticity Analyses of Small-Scale Functionally Graded Beams by Considering Spatial Variations in Length Scale Parameters. "First International Conference on Mechanics of Composites, MECHCOMP 2014", (2014).
  A.31 Aghdam B.H., Cigeroglu E., Sadeghi M.H., Output Only Functional Series Time Dependent AutoRegressive Moving Average (FS-TARMA) Modeling of Tool Acceleration Signals for Wear Estimation. "IMAC XXXIII: Conference & Exposition on Structural Dynamics", (2015).
  A.32 Batihan A.C., Cigeroglu E., Nonlinear Vibrations of A Beam With A Breathing Edge Crack. "IMAC XXXIII: Conference & Exposition on Structural Dynamics", (2015).
  A.33 Samandari H., Cigeroglu E., Nonlinear Vibrations of a Flexible L-Shaped Beam Using Differential Quadrature Method. "IMAC XXXIII: Conference & Exposition on Structural Dynamics", (2015).
  A.34 Ozturk V. Y., Cigeroglu E., Özgüven H. N., Optimization of Tooth Bending Fatigue Characteristics of Spur Gear Pairs using a Gear Dynamics-based Approach. "International Design Engineering Technical Conferences & Computers and Information in Engineering Co", (2015).
  A.35 Tepe C., Cigeroglu E., Structural Coupling of Two-Nonlinear Structures. "IMAC XXXIII: Conference & Exposition on Structural Dynamics", (2015).
  A.36 Ozcelik Y. E., Cigeroglu E., Caliskan M., Shock Response of an Antenna Structure Considering Geometric Nonlinearity. "IMAC XXXIV: Conference & Exposition on Structural Dynamics", (2016).
  A.37 Yavuz, D. S., Saribay Z. B., Cigeroglu E., Nonlinear Time-Varying Dynamic Analysis of a Multi-Mesh Spur Gear Train. "IMAC XXXIV: Conference & Exposition on Structural Dynamics", (2016).
  A.38 Dogus U., Özgen G. O., Cigeroglu E., A Modified Inverse Eigensensitivity Method for Large Finite Element Models. "IMAC XXXIV: Conference & Exposition on Structural Dynamics", (2016).
  A.39 Sert O., Cigeroglu E., Adaptive Harmonic Balance Methods, a Comparison. "IMAC XXXIV: Conference & Exposition on Structural Dynamics", (2016).
  A.40 Batihan A.C., Cigeroglu E., Nonlinear Vibrations of a Beam with a Breathing Edge Crack Using Multiple Trial Functions. "IMAC XXXIV: Conference & Exposition on Structural Dynamics", (2016).
  A.41 Ferhatoglu E., Cigeroglu E., Özgüven H. N., A Modal Superposition Method for the Analysis of Nonlinear Systems. "IMAC XXXIV: Conference & Exposition on Structural Dynamics", (2016).
  A.42 Aghdam B.H., Cigeroglu E., Functional Series TARMA Models for Non-stationary Tool Vibration Signals Representation and Wear Estimation. "IMAC XXXIV: Conference & Exposition on Structural Dynamic", (2016).
  A.43 Ozaydin O., Cigeroglu E., Effect of dry friction damping on the dynamic response of helicopter tail shaft. "IMAC XXXV: Conference Exposition on Structural Dynamics", (2017).
  A.44 Donmez A., Cigeroglu E., Ozgen G.O., The effect of stiffness and loading deviations in a nonlinear isolator having quasi zero stiffness and geometrically nonlinear damping. "ASME International Mechanical Engineering Congress and Exposition, Proceedings (IMECE)", (2017).
  A.45 Uz C., Cigeroglu E., Nonlinear vibrations of a functionally graded material microbeam with geometric nonlinearity. "IMAC XXXV: Conference Exposition on Structural Dynamics", (2017).
  A.46 Batihan A.C., Cigeroglu E., Nonlinear transverse vibrations of a beam with multiple breathing edge cracks. "IMAC XXXV: Conference Exposition on Structural Dynamics", (2017).
  A.47 Bilen M.E., Ciğeroğlu E., Özgüven H.N., Reduction of Helicopter Rotor Vibratory Loads Through Robust and Hybrid Optimization. "6th Asian / Australian Rotorcraft Forum", (2017).
  A.48 Yavuz S.D., Saribay Z.B., Cigeroglu E., Nonlinear dynamic analysis of a spiral bevel geared system. "IMAC XXXV: Conference Exposition on Structural Dynamics", (2017).
  A.49 Özkan B.,Cigeroglu E, Özgen G.O., Kadioglu F.S., Non-linear Dynamic Analysis for the Lateral Vibration of Beams with Breathing Crack under Harmonic Excitation Using Finite Element Method. "ICAF 2017 International Committee on Aeronautical Fatigue and Structural Integrity", (2017).

Publications (NATIONAL)

 

Conference Papers

  A.1 Ciğeroğlu E., Gaz Türbinli Motorların Türbin Kanatçıklarının Kuru Sürtünmeli Sönümleyicilerle Titreşim Genliklerinin Sönümlenmesi. "SAVTEK 2008, 4. Savunma Teknolojileri Kongresi", 1, (2008), s.575-582.
  A.2 Aydan G, Ciğeroğlu E, Başlamışlı SC, A Fictitious "Suspension Platform" for Optimal Ride Comfort. "OTEKON 2010 5. Otomotiv Teknolojileri Kongresi", (2010).
  A.3 Boral C, Ciğeroğlu E, Korkmaz İ, Kuru Sürtünmeli Sönümleyicilerin Kauçuk Motor Takozunun Performansına Etkisi. "OTEKON 2010 5. Otomotiv Teknolojileri Kongresi", (2010).
  A.4 Yümer E, Cigeroglu E, Özgüven HN, Sürtünme Parametrelerindeki Belirsizliklerin Kanatçikli Disklerin Titreşim Cevabina Etkisi. "SAVTEK 2010 5. Savunma Teknolojileri Kongresi", (2010).
  A.5 Baran İ, Özgen GO, Cigeroglu E, Bir Radar Anten Yapisinin Titreşim Özelliklerinin Topolojik Optimizasyon Tekniği İle İyileştirilmesi. "SAVTEK 2010 5. Savunma Teknolojileri Kongresi", (2010).
  A.6 Okyay A, Ciğeroğlu E, Başlamışlı SC, Sliding Mode Control of Anti-lock Braking System (ABS) Using Integral-Derivative Surface with Slip Reference Scheduling. "OTEKON 2010 5. Otomotiv Teknolojileri Kongresi", (2010).
  A.7 Baran İ, Özgen GO, Ciğeroğlu E, Bir Radar Anten Yapısının Titreşim Özelliklerinin Topolojik Optimizasyon Tekniği ve Destek Elemanları Kullanılarak İyileştirilmesi. "UMTS 2011 15. Ulusal Makina Teorisi Sempozyumu", (2011).
  A.8 Çınarel D., Ciğeroğlu E., Ataletsel Ölçüm Biriminin Titreşim Yalıtımı. "SAVTEK 2012 6. Savunma Teknolojileri Kongresi", (2012).
  A.9 Zaloğlu H., Özgen G.O., Ciğeroğlu E., Sonlu Elemanlar Analiziyle İcra Yayının Yay Karakteristiğinin Bulunması. "SAVTEK 2012 6. Savunma Teknolojileri Kongresi", (2012).
  A.10 Baytemir O.Y., Ciğeroğlu E., Özgen G.O., Hareketli Platforma Entegre Edilen Bir Mekanik Sistem İçin Optimum Pasif Titreşim İzolatörü Sayısının Belirlenmesi. "SAVTEK 2012 6. Savunma Teknolojileri Kongresi", (2012).
  A.11 Kayabaşı S., Başlamışlı S. Ç., Ciğeroğlu E., Zincir Yapılı Kütle Yay Sönümleyicili Sistemler İle Sürüş Konforunun Arttırılması. "OTEKON 2014 7. Otomotiv Teknolojileri Kongresi", (2014).
  A.12 Ozturk V. Y., Cigeroglu E., Özgüven H. N., Dişlilerde Dinamik İletim Hatasını Azaltmaya Yönelik İdeal Profil Değişiklikleri. "Uluslararası katılımlı 17. Makina Teorisi Sempozyumu, UMTS2015/TrISToMM2015", (2015).
  A.13 Yildirim C., Cigeroglu E., üzensiz Jet Motoru Türbin Ve Kompresör Kanatçıklı Diskleri İçin İndirgenmiş Sonlu Elemanlar Modellerinin İncelenmesi. "SAVTEK 2016 8. Savunma Teknolojileri Kongresi", (2016).
  A.14 Önder E.T., Baslamisli S.C., Cigeroglu E., Özgen G.O., Haddar M., Chaari F., Reduction of Vibrations in a Vehicle Powertrain by Active and Passive Methods. "TOK 2017 Otomatik Kontrol Türk Millî Komitesi Ulusal Toplantısı", (2017).
<< back