Academic Staff Roster includes academic activity information for 2017 and before; therefore the visible titles of faculty members may not be up to date. Academic activity information for 2018 and onwards can be tracked through AVESIS (Academic Data Management System).

Prof.Dr. ARCAN FEHMİ DERİCİOĞLU
FACULTY OF ENGINEERING
PublicationsResearchMembership & Awards
E-mail :  
Url :  -
Phone :  +90312210 5941
Fax :  +903122102518
Address :
 

Education

  Bachelor's, Middle East Technical University, Metallurgical & Materials Eng.
  Master's, Middle East Technical University, Metallurgical & Materials Eng.
  Doctorate, The University of Tokyo, Materials Science & Eng.

Publications (INTERNATIONAL)

Journal Papers

  A.1 Dericioglu A. F. and Kagawa Y., Improvement of Fracture Resistance in a Glass Matrix Optomechanical Composite by Minicomposite Unit Bridging. "Materials Science and Engineering A", 406, (2005), p.142-151.
  A.2 Dericioglu A. F., Boccaccini A. R., Dlouhy I. and Kagawa Y., Effect of Chemical Composition on the Optical Properties and Fracture Toughness of Transparent Magnesium Aluminate Spinel Ceramics. "Materials Transactions", 46, (2005), p.996-1003.
  A.3 Boccaccini A. R., Acevedo D., Dericioglu A. F. and Jana C,, Processing and Characterisation of Model Optomechanical Composites in the System Sapphire Fibre/Borosilicate Glass Matrix. "Journal of Materials Processing Technology", 169, (2005), p.270-280.
  A.4 Naganuma, T., Kakisawa, H., Dericioglu, A. F. and Kagawa, Y.,, Fabrication of alumina/polyimide multi-layered material by sputtering and vapor deposition polymerization, vol. 114, no. 1332, 713-715 (2006). "Journal of the Ceramic Society of Japan", 114, (2006), p.713-715.
  A.5 Tanaka M., Hasegawa M., Dericioglu A. F. and Kagawa Y., Measurement of Residual Stress in Air Plasma-Sprayed Y2O3-ZrO2 Thermal Barrier Coating System Using Micro-Raman Spectroscopy. "Materials Science and Engineering A", 419, (2006), p.262-268.
  A.6 Lindstrom H., Dericioglu A., Kamei M., and Kagawa Y., Variation of Mechanical Properties of TiO2 during Li Insertion. "Electrochemical and Solid-State Letters", 10, (2007), p.E7-E10.
  A.7 A. F. Dericioglu, Effect of Microstructure on the Mechanical Behavior of Reactive Magnetron Sputtered Al2O3/TiO2 Multilayer Ceramics. "Materials Transactions", 49, (2008), p.2714-2722.
  A.8 Chlup Z., Dlouhy I., Gürbüz S., Dericioğlu A. F. and Kozák V., Interfacial characterisation in transparent spinel matrix reinforced by SiC fibre. "Key Engineering Materials", 409, (2009), p.252-259.
  A.9 Ekiz O. O., Dericioglu A. F. and Kakisawa H., An Efficient Hybrid Conventional Method to Fabricate Nacre-Like Bulk-Nano-Laminar Composites. "Materials Science and Engineering C", 26, (2009), p.2050-2054.
  A.10 Tan E., Kagawa Y. and Dericioglu, A. F., Electromagnetic Wave Absorption Potential of Si-C Based Ceramic Woven Fabrics. "Journal of Materials Science", 44, (2009), p.1172-1179.
  A.11 Dericioglu A. F., Liu Y. F. and Kagawa Y., Extensive deformation behavior of an all-oxide Al2O3-TiO2 nanostructured multilayer ceramic at room temperature. "Journal of Materials Research", 24, (2009), p.3387-3396.
  A.12 Nakaş, G. İ., Dericioglu A. F. and Bor Ş., Fatigue Behavior of TiNi Foams Processed by Magnesium Space Holder Technique 4 (8) , pp.. "Journal of the Mechanical Behavior of Biomedical Materials", 4, (2011), p.2017-2023.
  A.13 Dericioglu A.F., Naumov P. and Tanaka Y., Templated deposition of porous fullerene-C60 in the interior of siliceous sponge spicules as a biogenic microvessel. "Journal of Materials Research", 27, (2012), p.2851-2857.
  A.14 Esen, Z., Dikici, B., Duygulu, O., Dericioglu, A. F., Titanium-magnesium based composites: Mechanical properties and in-vitro corrosion response in Ringer's solution. "Materials Science and Engineering A", 573, (2013), p.119-126.
  A.15 Sahoo SC, Sinha SB, Kiran MSRN, Ramamurty U, Dericioglu AF, Reddy CM, Naumov P, Kinematic and Mechanical Profile of the Self-Actuation of Thermosalient Crystal Twins of 1,2,4,5-Tetrabromobenzene: A Molecular Crystalline Analogue of a Bimetallic Strip. "Journal of the American Chemical Society", 135, (2013), p.13843-13850.
  A.16 Nakaş G. İ., Dericioglu A. F. and Bor Ş., Monotonic and cyclic compressive behavior of superelastic TiNi foams processed by sintering using magnesium space holder technique. "Materials Science and Engineering A", 582, (2013), p.140-146.
  A.17 Gurbuz S. N. and Dericioglu A. F., Effect of reinforcement surface functionalization on the mechanical properties of nacre-like bulk lamellar composites processed by a hybrid conventional method. "Materials Science and Engineering C", 33, (2013), p.2011-2019.
  A.18 Aydogan E., Kaya S. and Dericioglu A. F., Morphology and magnetic properties of barium hexaferrite ceramics synthesized in x wt% NaCl-(100-x) wt% KCL molten salts. "Ceramics International", 40, (2014), p.2331-2336.
  A.19 Selen N. Gurbuz Guner, Arcan F. Dericioglu, Nacre-mimetic epoxy matrix composites reinforced by two-dimensional glass reinforcements. "RSC Advances", 6, (2016), p.33184-33196.
  A.20 Atabay Sila Ece, ESEN ZİYA, DERİCİOĞLU ARCAN FEHMİ, Effect of Sn Alloying on the Diffusion Bonding Behavior of Al-Mg-Si Alloys. "METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE", 48, (2017), p.3181-3187.
  A.21 Bilgin Guney Mert, ESEN ZİYA, Akin Seniz Kushan, DERİCİOĞLU ARCAN FEHMİ, Optimization of the mechanical properties of Ti-6Al-4V alloy fabricated by selective laser melting using thermohydrogen processes. "MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING", 700, (2017), p.574-582.
  A.22 Guner Selen N. Gurbuz, DERİCİOĞLU ARCAN FEHMİ, Nacre-mimetic bulk lamellar composites reinforced with high aspect ratio glass flakes. "BIOINSPIRATION BIOMIMETICS", 12, (2017), p.016002.
 

Conference Papers

  A.1 Dericioglu A. F., Kamei M., Tanaka Y. and Kagawa Y., Fabrication and Mechanical Behavior of Nanostructured Oxide Multilayer Ceramic Composites. "6th Pacific Rim Conference on Ceramic and Glass Technology (PACRIM 6)", (2005).
  A.2 Dericioglu A. F., Kamei M., Tanaka Y. and Kagawa Y., Mechanically Robust Nanostructured Multilayer Composites. "NANOMAT 2006 - International workshop on nanostructured materials", (2006), p.187.
  A.3 Lindstrom H. and Dericioglu A. F., Tunable Mechanical Bulk Properties of Nanostructured TiO2 by Insertion of Li+ Ions. "NANOMAT 2006 - International workshop on nanostructured materials", (2006), p.270.
  A.4 Dericioglu A.F., Kagawa Y., Effect of Al2O3-ZrO2 Minicomposite Reinforcement on the Optical and Mechanical Properties of a Glass Matrix Composite. "ACERS 2007 Glass & Optical Materials Division Meeting & 18th University Conference on Glass", (2007), p.19.
  A.5 A. F. Dericioglu (invited talk), Mechanical Behavior of Nanostructured Composites with Unique Architectures. "“Honda Kotaro” Memorial Seminar", (2008).
  A.6 Tan E. and Dericioglu A. F., Electromagnetic Wave Absorption Potential of Si-C Based Ceramic Woven Fabrics. "32nd International Conference & Exposition on Advanced Ceramics and Composites (ICACC)", (2008).
  A.7 A. F. Dericioglu (invited talk), Nanostructured Multilayer Ceramic Composite Deformable at Ambient Temperature. "MANA International Symposium, 2008 & ICYS Workshop 2008", (2008).
  A.8 Arcan F. Dericioglu, Multilayer All-Oxide Crystalline Ceramics Deformable at Room Temperature. "Materials Science & Technology 2009 Conference and Exhibition (MS&T'09)", (2009), p.146.
  A.9 Erdem, D. and Dericioglu A. F., Microwave Sintering of Soft Magnetic Ni-Fe Alloys. "Junior Euromat 2010", (2010).
  A.10 Gurer G., Aydin Civi O. and Dericioglu A. F., Electromagnetic Wave Absorption Properties of Surface-Modified Glass Fabric Reinforcements. "22. International Congress on Glass 2010 (ICG 2010) (Book of Abstracts)", (2010), p.75.
  A.11 Gurer G., Aydin Civi O. and Dericioglu A. F., Incorporation of Electromagnetic Wave Absorbing Characteristic to Woven Glass Fabrics by Surface Modification. "Junior Euromat 2010", (2010).
  A.12 Aydogan E. and Dericioglu A. F., Developing Pathways for the Processing of “Bioinspired” Polymer Matrix Composites. "Junior Euromat 2010", (2010).
  A.13 Erdem D. and Dericioglu A. F., MICROWAVE SINTERING AND CHARACTERIZATION OF SOFT MAGNETIC POWDER METALLURGICAL Ni-Fe ALLOYS. "Euro PM2011 Conference Proceedings - EPMA", 3, (2011), p.147-152.
  A.14 Selen N. Gurbuz, Arcan F. Dericioglu, Processing and Characterization of Inorganic-Organic Bio-Inspired Bulk Laminar Composites. "Euro Bio-Inspired Materials", (2012).
  A.15 Aylin Gunes and Arcan F. Dericioglu, Processing and Characterization of Glass Flake-Reinforced Polystyrene Matrix Bio-Inspired Bulk Lamellar Composites. "Euro Intelligent Materials 2013", (2013), p.39.
  A.16 Seray KAYA, Eda AYDOGAN and Arcan F. DERİCİOGLU, Formation Kinetics, Morphology and Magnetic Properties of BaHF Ceramics Synthesized in x wt%NaCl- (100-x) wt% KCl Molten Salts. "Advanced Materials World Congress-AMWC 2013- Çeşme/İzmir", (2013), p.45-46.
  A.17 Ozgur Hamat, Aylin Gunes and Arcan F. Dericioğlu, Incorporation of Electromagnetic Wave Absorbing Characteristic to Woven Glass Fiber Woven Fabrics By Nanometer Order Surface Modification. "Euro Intelligent Materials 2013", (2013).
  A.18 Selen N. Gurbuz, Arcan F. Dericioglu, Processing and Characterization of Bioinspired Nacre-Like Bulk Lamellar Composites Reinforced With Glass Flakes. "2013 MRS Fall Meeting & Exhibit", (2013).
  A.19 Seray KAYA, Eda AYDOGAN and Arcan F. DERİCİOGLU, Effect of Molten Salt Synthesis Parameters on the Formation Kinetics, Morphology and Magnetic Properties of Barium Hexaferrite Ceramics. "38th International Conference & Exposition on Advanced Ceramics & Composites (ICACC)", (2014).
  A.20 Gurbuz Selen N. and Dericioglu Arcan F., Processing and Characterization of Alumina Flake Reinforced Bioinspired Nacre-Like Bulk Lamellar Composites. "38th International Conference & Exposition on Advanced Ceramics & Composites (ICACC)", (2014).
  A.21 S. N. Gurbuz, C. Durucan, A. F. Dericioglu, Development of Organic-Inorganic Bulk Hybrid Composites Bio-Inspired By Nacre . "26th Symposium and Annual Meeting of the International Society for Ceramics in Medicine (BIOCERAMICS", (2014).
  A.22 E. Alpugan, S. Coskun, A.F. Dericioglu, H.E. Unalan, Electromagnetic Interface Shielding Behavior of Silver Nanowire Networks. "2015 MRS Fall Meeting & Exhibit", (2015).
  A.23 S.Tulbez, Z. Esen, A.F.Dericioglu, Processing and Characterization of Carbon Fiber-Reinforced Silicon Carbide (C/SiC) Matrix Composites. "TMS 2015: Annual Meeting & Exhibition", (2015).
  A.24 Ece Alpugan, Sahin Coskun, Arcan F. Dericioglu, Husnu E. Unalan, Silver Nanowire Networks for Flexible Electromagnetic Interface Shields. "TMS 2016 145th ANNUAL MEETING & EXHIBITION", (2016).
  A.25 Guney Mert Bilgin, Arcan F. Dericioglu, Ziya Esen, Seniz Reyhan Kushan Akin, Optimization of the Mechanical Properties of the Ti-6Al-4V Alloy Fabricated By Additive Manufacturing Using Thermochemical Processe . "TMS 2016 145th ANNUAL MEETING & EXHIBITION", (2016).
  A.26 Sila E. Atabay, Arcan F. Dericioglu, Effect of Interlayer Material on the Mechanical Properties of Diffusion Bonded Aluminum Joints. "TMS 2016 145th ANNUAL MEETING & EXHIBITION", (2016).
  A.27 Ece Alpugan, Sahin Coskun, Arcan F. Dericioglu, Husnu E. Unalan, Flexible Silver Nanowire Networks for High Frequency Shielding. "2016 MRS Fall Meeting & Exhibit", (2016).
  A.28 Atabay Sila Ece, DERİCİOĞLU ARCAN FEHMİ, Effect of Alloying Elements on Diffusing Bonding Parameters in Al6063. "TMS 2017 146th Annual Meeting and Exhibition", (2017).
  A.29 Guney Mert Bilgin; Ziya Esen; Seniz Kushan Akin; Arcan Dericioglu, Tailoring the Mechanical Properties of Additively Manufactured Ti-6Al-4V Alloys by Post Processing. "TMS 2017 146th Annual Meeting and Exhibition", (2017).
  A.30 Ehsan Hajisaeid, Arcan F. Dericioglu, Alkim Akyurtlu, A Novel Experimental Method for Microwave Dielectric Characterization of Flexible or Rigid Thin Sheets. "89th ARFTG Microwave Measurement Conference (ARFTG)", (2017).
  A.31 Atabay Sila Ece, DERİCİOĞLU ARCAN FEHMİ, Optimization of the Diffusion Bonding Process for Al 6063 Alloy. "TMS 2017 146th Annual Meeting and Exhibition", (2017).

Book and Chapter in a Book

  A.1 Arcan F. Dericioglu, Powder Core Materials. "Transformers: Analysis, Design and Measurement", (2012), p.447-460.

Publications (NATIONAL)

 

Conference Papers

  A.1 Dericioglu A. F., Kamei M., Tanaka Y. and Kagawa Y., Deformation Behavior of Al2O3-TiO2 Nanostructured Multilayer Ceramic Composites. "Proceedings of the 6th International Conference on Intelligent Materials and Systems (ICIM’05)", (2005).
  A.2 Tan E., Dericioglu A.F., Karbür ve Oksit Esaslı Seramik Dokumaların Elektromanyetik Dalga Soğurma Özellikleri. "IV. Uluslararası Katılımlı Seramik, Cam, Emaye, Sır ve Boya Semineri (SERES'07)", (2007), s.575-584.
  A.3 Burcu Kayıplar, Arcan F. Dericioğlu, A Comparative Study on Microwave and Conventional Sintering Characteristics of Alumina and Alumina Based Nanocomposite Materials. "5. Ulusal Nanobilim ve Nanoteknoloji Konferansı (NanoTR5)", (2009), s.365.
  A.4 Göksu Gürer, Özlem Aydın Çivi, Arcan F. Dericioğlu, Effect of Surface Modification on the Electromagnetic Wave Absorbing Properties of Woven Glass Fabrics. "5. Ulusal Nanobilim ve Nanoteknoloji Konferansı (NanoTR5)", (2009), s.64.
  A.5 Erdem, D. and Dericioglu A. F., Manyetik Nikel Demir Alaşımlarının Mikrodalga Sinterleme Yöntemiyle Üretilmesi. "Proceedings of the 15th International Metallurgy & Materials Congress (IMMC 2010)", (2010), s.708-716.
  A.6 Gurer G., Aydin Civi O. and Dericioglu A. F., Yüzey Modifikasyonu Uygulanmış Cam Elyaf Dokumaların Elektromanyetik Dalga Soğurma Özellikleri. "Proceedings of the 15th International Metallurgy & Materials Congress (IMMC 2010)", (2010), s.300-308.
  A.7 Derya Erdem, Arcan F. Dericioğlu, MANYETİK NİKEL DEMİR ALAŞIMLARININ MİKRODALGA SİNTERLEME YÖNTEMYLE ÜRETİLMESİ . "6. ULUSLARARASI TOZ METALURJİSİ KONFERANSI ve SERGİSİ BİLDİRİLER KİTABI", (2011), s.461-466.
  A.8 Ziya ESEN, Arcan F. DERİCİOĞLU, Şakir BOR, BİYOMEDİKAL UYGULAMALAR İÇİN Ti-Mg KOMPOZİTLERİNİN GELİŞTİRİLMESİ . "6. ULUSLARARASI TOZ METALURJİSİ KONFERANSI ve SERGİSİ BİLDİRİLER KİTABI", (2011), s.163-169.
  A.9 Selen N. GÜRBÜZ, Aylin GÜNEŞ, Arcan F. DERİCİOĞLU, FABRICATION AND CHARACTERIZATION OF BIO-INSPIRED NACRE-LIKE BULK LAMELLAR COMPOSITES BY “HASC”. "16th International Metallurgy & Materials Congress", (2012), s.190-201.
  A.10 Göksu GÜRER, Özgür HAMAT, Özlem AYDIN ÇİVİ and Arcan F. DERİCİOĞLU, Design and Characterization of Electromagnetic Wave Absorbing Structural Composites. "16th International Metallurgy & Materials Congress", (2012), s.1138-1147.
  A.11 Eda AYDOĞAN, Seray KAYA, Muharrem TİMUÇİN, Arcan F. DERİCİOĞLU, PROCESSING & CHARACTERIZATION OF TEXTURED BARIUM FERRITE CERAMICS. "16th International Metallurgy & Materials Congress", (2012), s.202-209.
  A.12 Arcan F. Dericioglu, Developing Pathways for the Processing of ORGANIC-INORGANIC BULK “Bio-inspired” Composites. "MANA/ICYS Reunion Workshop 2014", (2014).
  A.13 Aylin GÜNEŞ, Özgür HAMAT, Tuğçe ALTUNTOP, Esma AVİL and Arcan F. DERİCİOĞLU, PROCESSING AND CHARACTERIZATION OF THE ELECTROMAGNETIC WAVE ABSORPTION POTENTIAL OF GLASS FIBER-REINFORCED THERMOPLASTIC POLYMER MATRIX COMPOSITES. "17th International Metallurgy & Materials Congress (IMMC 2014)", (2014), s.244-253.
  A.14 Öznur Gelleci, Gözde Ceren Narsap, Burcu Kayiplar and Arcan F. Dericioglu, A Comparative Study on Microwave and Conventional Sintering Characteristics of Yttria Stabilized Zirconia Ceramics . "Turkish Powder Metallurgy Association", (2014).
  A.15 Seray KAYA, Eda AYDOGAN and Arcan F. DERİCİOGLU, EFFECT OF MOLTEN SALT SYNTHESIS PARAMETERS ON THE MORPHOLOGY AND MAGNETIC PROPERTIES OF BARIUM HEXAFERRITE CERAMICS SYNTHESIZED IN X WT% NACL-(100−X) WT% KCL FLUXES. "17th International Metallurgy & Materials Congress (IMMC 2014)", (2014), s.285-293.
  A.16 Simge TÜLBEZ, Arcan F. DERİCİOĞLU, PROCESSING AND CHRACTERIZATION OF CARBON FIBER REINFORCED SILICON CARBIDE (C/SiC) MATRIX COMPOSITES. "17th International Metallurgy & Materials Congress (IMMC 2014)", (2014), s.214-219.
  A.17 Aylin Gunes, Simge Tulbez and Arcan F. Dericioglu, Processing and Characterization of Glass Flake-Reinforced Thermoplastic Polymer Matrix Bio-Inspired Bulk Lamellar Composites. "17th International Metallurgy & Materials Congress (IMMC 2014)", (2014), s.232-243.
  A.18 Sila E. Atabay, Arcan F. Dericioglu, Optimization of the Diffusion Bonding Parameters for 6063 Aluminum Alloy. "18th International Metallurgy & Materials Congress (IMMC 2016)", (2016), s.637-640.
  A.19 Emel Erdal, Simge Tülbez, Arcan F. Dericioglu, Synthesis of BaHF Ceramics by Microwave Heating. "18th International Metallurgy & Materials Congress (IMMC 2016)", (2016), s.166-169.
  A.20 Simge Tülbez, Ziya Esen, Arcan F. Dericioglu, Optimization of Pyrolysis and Liquid Silicon Infiltration Parameters for the Processing of C/C-SiC Composites. "18th International Metallurgy & Materials Congress (IMMC 2016)", (2016), s.49-51.
  A.21 Onur Dinçer, M. Kaan Pehlivanoğlu, Arcan F. Dericioglu, High Strength Copper Alloys for Extreme Temperature Conditions. "18th International Metallurgy & Materials Congress (IMMC 2016)", (2016), s.693-696.
  A.22 Guney Mert Bilgin, Ziya Esen, Seniz Reyhan Kushan Akin, Arcan F. Dericioglu, Microstructural Refi nement of Ti-6Al-4V Alloy Fabricated by Additive Manufacturing Using Thermochemical Processes. "18th International Metallurgy & Materials Congress (IMMC 2016)", (2016), s.398-401.
<< back