Academic Staff Roster includes academic activity information for 2017 and before; therefore the visible titles of faculty members may not be up to date. Academic activity information for 2018 and onwards can be tracked through AVESIS (Academic Data Management System).

Prof.Dr. GÖKNUR BAYRAM
FACULTY OF ENGINEERING
PublicationsResearchMembership & Awards
E-mail :  
Url :  -
Phone :  +90312210 2632
Fax :  +903122102600
Address :
 

Education

  Bachelor's, Middle East Technical University, Chemical Eng.
  Master's, Middle East Technical University, Chemical Eng.
  Doctorate, Middle East Technical University, Chemical Eng.

Publications (INTERNATIONAL)

Journal Papers

  A.1 Bayram, G., Yılmazer, Ü. and Xanthos, M., Viscoelastic Properties of Reactive and Non-reactive Blends of Ethylene-Methyl Acrylate Copolymers with Styrene-Maleic Anhydride Copolymer. "Polymer Engineering and Science", 41, (2001), p.262-274.
  A.2 Bayram, G., Yılmazer, Ü. and Xanthos, M., Compatibilization and Characterization of Blends of Styrene-Maleic Anhydride Copolymer with Modified Polyethylenes. "Journal of Applied Polymer Science", 80, (2001), p.790-797.
  A.3 Bayram, G., Yılmazer, Ü., Xanthos, M. and Patel, S.H., Rheological Behavior of Styrene-Maleic Anhydride/Polyol Blends Obtained through Reactive Processing. "Journal of Applied Polymer Science", 85, (2002), p.2615-2623.
  A.4 Bayram, G. and Yılmazer, Ü., Reactive Processing and Properties of Styrene-Maleic Anhydride and Polytetramethylene Ether Glycol. "Journal of Applied Polymer Science", 83, (2002), p.2148-2156.
  A.5 Isik, I., Yilmazer, U. and Bayram, G., Impact Modified Epoxy/Monmorillonite Nanocomposites: Synthesis and Characterization. "Polymer", 44, (2003), p.6371-6377.
  A.6 Ozkoc, G., Bayram, G. and Bayramli, E., Effects of polyamide 6 incorporation to the short glass fiber reinforced ABS composites: an interfacial approach. "Polymer", 45, (2004), p.8957-8966.
  A.7 Sakiyan, O., Sumnu, G., Sahin, S. and Bayram, G., Influence of fat content and emulsifier type on the rheological properties of cake batter. "European Food Research and Technology", 219, (2004), p.635-638.
  A.8 Akkaoui, W. and Bayram, G., Effects of processing parameters on mechanical and thermal properties of glass mat reinforced nylon 6 composites. "Journal of Reinforced Plastics and Composites", 23, (2004), p.881-892.
  A.9 Durgun, H. and Bayram, G., Improvement of Adhesion Between Poly(ethylene terephthalate) and Polyethylene. "Journal of Adhesion Science and Technology", 19, (2005), p.407-425.
  A.10 Ozkoc, G., Bayram, G. and Bayramli, E., Short Glass Fiber Reinforced ABS and ABS/PA6 Composites: Processing and Characterization. "Polymer Composites", 26, (2005), p.745-755.
  A.11 Basara, C., Yilmazer, U. and Bayram, G., Synthesis and Characterization of Epoxy Based Nanocomposites. "Journal of Applied Polymer Science", 98, (2005), p.1081-1086.
  A.12 Koysuren, O., Yesil, S. and Bayram, G., Effect of Composite Preparation Techniques on Electrical and Mechanical Properties and Morphology of Nylon 6 Based Conductive Polymer Composites. "Journal of Applied Polymer Science", 102, (2006), p.2520-2526.
  A.13 Koysuren, O., Yesil, S. and Bayram, G., Effect of surface treatment on electrical conductivity of carbon black filled conductive polymer composites. "Journal of Applied Polymer Science", 104, (2007), p.3427-3433.
  A.14 Bayram, G. and Ozkoc, G., Processing and characterization of multilayer films of poly(ethylene terephthalate) and surface-modified poly(tetrafluoroethylene). "Journal of Adhesion Science and Technology", 21, (2007), p.883-898.
  A.15 Ozkoc, G., Bayram, G. and Bayramli, E., Effects of olefin-based compatibilizers on the morphology, thermal and mechanical properties of ABS/polyamide-6 blends. "Journal of Applied Polymer Science", 104, (2007), p.926-935.
  A.16 Ozkoc, G., Bayram, G. and Quaedflieg, M., Effects of microcompounding process parameters on the properties of ABS/polyamide-6 blends based nanocomposites. "Journal of Applied Polymer Science", 107, (2008), p.3058-3070.
  A.17 Ozkoc, G., Bayram, G. and Tiesnitsch, J., Microcompounding of organoclay-ABS/PA6 blend-based nanocomposites. "Polymer Composites", 29, (2008), p.345-356.
  A.18 Isik, I., Yilmazer, U. and Bayram, G., Impact modified polyamide-6/organoclay nanocomposites: Processing and characterization. "Polymer Composites", 29, (2008), p.133-141.
  A.19 Ozkoc, G., Bayram, G. and Bayramli, E., Impact essential work of fracture toughness of ABS/polyamide-6 blends compatibilized with olefin based copolymers. "Journal of Materials Science", 43, (2008), p.2642-2652.
  A.20 Koysuren, O., Yesil, S., Bayram, G., Secmen, M. and Aydin Civi, O., Effect of a carbon black surface treatment on the microwave properties of poly(ethylene terephthalate)/carbon black composites. "Journal of Applied Polymer Science", 109, (2008), p.152-159.
  A.21 Korpe, S., Erdogan, B., Bayram, G., Ozgen, S., Uludag, Y. and Bicak, N.,, Crosslinked DADMAC Polymers as Cationic Super Absorbents. "Reactive and Functional Polymers", 69, (2009), p.660-665.
  A.22 Eroglu, D., Nur, Y., Sonmez, U., Bayram, G., Pitcher, M.W. and Toppare, L.K., Batteries and a Pinch of Salt: A Simple Toolkit for the Production of Poly(methylsilyne). "Journal of Applied Polymer Science", 112, (2009), p.3519-3521.
  A.23 Koysuren, O., Du, C.S., Pan, N. and Bayram, G., Preparation and Comparison of Two Electrodes for Supercapacitors: Pani/CNT/Ni and Pani/Alizarin-Treated Nickel. "Journal of Applied Polymer Science", 113, (2009), p.1070-1081.
  A.24 Yesil, S., Winkelmann, C., Bayram, G. and La Saponara, V., Surfactant-modified multiscale composites for improved tensile fatigue and impact damage sensing. "Materials Science and Engineering A-Structural Materials Properties Microstructure and Processing", 527, (2010), p.7340-7352.
  A.25 Kilinc, M., Cakal, G.O., Yesil, S., Bayram, G., Eroglu, I. and Ozkar, S., Scale-up synthesis of zinc borate from the reaction of zinc oxide and boric acid in aqueous medium . "Journal of Crystal Growth", 312, (2010), p.3361-3366.
  A.26 Eroglu, D., Nur, Y., Bayram, G. and Toppare, L.K., Electrochemical Synthesis of Poly(methylsilyne) and Investigation of the Effects of Parameters on the Synthesis . "Journal of Applied Polymer Science", 118, (2010), p.3049-3057.
  A.27 Yesil, S., Koysuren, O. and Bayram, G., Effect of Microfiber Reinforcement on the Morphology, Electrical, and Mechanical Properties of the Polyethylene/Poly(ethylene terephthalate)/Carbon Nanotube Composites. "Polymer Engineering and Science", 50, (2010), p.2093-2105.
  A.28 Koysuren, O., Yesil, S. and Bayram, G., Effect of Solid State Grinding on Properties of PP/PET Blends and Their Composites with Carbon Nanotubes . "Journal of Applied Polymer Science", 118, (2010), p.3041-3048.
  A.29 Isitman, N.A., Akyol, M., Ozkoc, G., Bayram, G. and Kaynak C., Interfacial Strength in Short Glass Fiber Reinforced Acrylonitrile-Butadiene-Styrene/Polyamide 6 Blends. "Polymer Composites", 31, (2010), p.392-398.
  A.30 Yesil, S. and Bayram, G., Poly(ethylene terephthalate)/Carbon Nanotube Composites Prepared with Chemically Treated Carbon Nanotubes. "Polymer Engineering and Science", 51, (2011), p.1286-1300.
  A.31 Yesil, S. and Bayram, G., Effect of Carbon Nanotube Purification on the Electrical and Mechanical Properties of Poly(ethylene terephthalate) Composites with Carbon Nanotubes in Low Concentration. "Journal of Applied Polymer Science", 119, (2011), p.3360-3371.
  A.32 Isik-Gulsac, Isil; Yilmazer, Ulku; Bayram, Goknur, Mechanical and rheological properties, and morphology of polyamide-6/organoclay/elastomer nanocomposites. "Journal of Applied Polymer Science", 125, (2012), p.4060-4073.
  A.33 Arronche, L., La Saponara, V., Yesil, S. and Bayram, G., Impact damage sensing of multiscale composites through epoxy matrix containing carbon nanotubes. "Journal of Applied Polymer Science", 128, (2013), p.2797-2806.
  A.34 Isik-Gulsac, I., Yilmazer, U. and Bayram, G., Effects of Addition Order of the Components on Polyamide-6/Organoclay/Elastomer Ternary Nanocomposites. "Advances in Polymer Technology", 32, (2013), p.E675-E691.
  A.35 Celebi, H., Bayram, G. and Dogan, A., Effect of ZnO type and concentration on the mophology, thermal, and mechanical properties of poly(ether ester)/ZnO composites. "Journal of Applied Polymer Science", 129, (2013), p.3417-3424.
  A.36 Yesil, S. and Bayram, G., Effect of carbon nanotube surface treatment on the morphology, electrical, and mechanical properties of the microfiber-reinforced polyethylene/poly(ethylene terephthalate)/carbon nanotube composites. "Journal of Applied Polymer Science", 127, (2013), p.982-991.
  A.37 Baltaci, B., Cakal, G. O., Bayram, G., Eroglu, I. and Ozkar, S., Surfactant modified zinc borate synthesis and its effect on the properties of PET. "Powder Technology", 244, (2013), p.38-44.
  A.38 Zeybek Vural, S., Bayram, G. and Uludag, Y., Experimental investigation of drag reduction effects of polymer additives on turbulent pipe flow using ultrasound Doppler velocimetry. "Turkish Journal of Chemistry", 38, (2014), p.142-151.
  A.39 Özbek, M.O., Bayram, G. and Özgen, C., Molecular weight control of poly(ethylene terephthalate) in extrusion process. "Polymer Engineering and Science", 54, (2014), p.459-465.
  A.40 Kilinc, M., Cakal, G.O., Bayram, G., Eroglu, I., Ozkar, S., Flame retardancy and mechanical properties of pet-based composites containing phosphorus and boron-based additives. "Journal of Applied Polymer Science", 132, (2015), p.42016.
  A.41 Celebi, H., Bayram, G. and Dogan, A., Influence of Zinc Oxide on Thermoplastic Elastomer-Based Composites: Synthesis, Processing, Structural, and Thermal Characterization. "Polymer Composites", 37, (2016), p.2369-2376.
 

Conference Papers

  A.1 Bayram, G., Yılmazer, Ü. and Xanthos, M., Effect of Chain Extension/Branching on the Viscoelastic Behavior of Styrene-Maleic Anhydride/Polyol Blends. "The Society of Plastics Engineers' 59th Annual Technical Conference", (2001).
  A.2 Bayram, G. and Yılmazer, Ü., Anhydride/Epoxy Functionalized Blends: Mechanical, Rheological and Thermal Properties. "2001 Material Research Society Fall Meeting", (2001).
  A.3 Yılmazer, Ü., Bayram, G. and Xanthos, M., Effects of Reactive Extrusion and Batch Mixing on the Properties of Styrene-Maleic Anhydride/Olefinic Blends. "2nd Chemical Engineering Conference for Collaborative Research in Eastern Mediterranean", (2001), p.188-189.
  A.4 Bayram, G., A Study on Processing and Characterization of Conductive Polymer Composites. "Frontiers of Spintronics and Optics in Semiconductors:A Symposium in Honor of E. I. Rashba, NATO ARW", (2002).
  A.5 Başara, Ç., Yılmazer, Ü. and Bayram, G., Nanocomposites Based on Epoxy Matrix. "2002 Material Research Society Fall Meeting", (2002), p.205-206.
  A.6 Işık, I., Yılmazer, Ü. and Bayram, G, Impact Modification of Nanocomposites with an Epoxy Matrix. "2002 Material Research Society Fall Meeting", (2002), p.205.
  A.7 Bayram, G., Yilmazer, U. and Xanthos, M., Morphology, Mechanical Behavior and Melt State Viscoelastic Properties of Reactive Polystyrene and Polyethylene Copolymers. "PPS-2003 Polymer Processing Society – Europe/Africa Regional meeting", (2003).
  A.8 Isik, I., Yilmazer, U. and Bayram, G., Polyol Modified Epoxy-Montmorillonite Nanocomposites. "The 61st Annual Technical Conference-ANTEC’2003", (2003).
  A.9 Basara, C., Yilmazer, U. and Bayram, G., Influence of Clay Type and Content on Morphological and Mechanical Properties of Epoxy-Based Nanocomposites. "3rd Chemical Engineering Conference for Collaborative Research in Eastern Mediterranean", (2003).
  A.10 Basara, C., Yılmazer, U. and Bayram, G., Morphological, Thermal and Mechanical Properties of Epoxy Based Nanocomposites. "The 61st Annual Technical Conference-ANTEC’2003", (2003).
  A.11 Isik, I., Yilmazer, U. and Bayram, G., Synthesis and Characterization of Impact Modified Epoxy-Clay Nanocomposites. "3rd Chemical Engineering Conference for Collaborative Research in Eastern Mediterranean", (2003).
  A.12 Ozkoc, G., Bayram, G. and Bayramli, E., An Alternative Method for Processing of Short Glass Fiber Reinforced Thermoplastic Composites. "3rd Chemical Engineering Conference for Collaborative Research in Eastern Mediterranean", (2003).
  A.13 Kılınc, M. and Bayram, G., Morphological, Mechanical and Thermal Properties of Ternary Composites with Poly(ethylene terphthalate) Matrix. "2004 Material Research Society Fall Meeting", (2004).
  A.14 Ozkoc, G., Bayram, G. and Bayramli, E., Processing and Characterization of Short Glass Fiber/ABS/Polyamide-6 Composites. "2004 Material Research Society Fall Meeting", (2004).
  A.15 Isik, I., Yilmazer, U. and Bayram, G., Flexural Properties and Morphology of Impact Modified Epoxy-Organoclay Nanocomposites. "The 62nd Annual Technical Conference-ANTEC 2004", (2004).
  A.16 Ozkoc, G., Bayram, G. and Bayramli, E., A Study on Processing and Characterization of Short Glass Fiber Reinforced ABS/PA6 Blends. "The 62nd Annual Technical Conference-ANTEC 2004", (2004).
  A.17 Durgun, H. and Bayram, G., Enhancement of Adhesion Between High Density Polyethylene and Poly(ethylene terephthalate)Films. "The 62nd Annual Technical Conference-ANTEC 2004", (2004).
  A.18 Kilinc, M. and Bayram, G., Effect of Elastomer Type on Mechanical and Morphological Properties of PET Based Ternary Composites. "The 21st Annual Meeting of The Polymer Processing Society, PPS-21", (2005).
  A.19 Bayram, G., Ozkoc, G. and Kurkcu, P., Improvement of Adhesion Between Poly(tetrafluoroethylene) and Poly(ethylene terephthalate) Films. "Fifth International Symposium on Polymer Surface Modification", (2005), p.28.
  A.20 Koysuren, O., Yesil, S. and Bayram, G., Preparation and Characterization of Nylon 6 Based Conductive Composites. "The 63rd Annual Technical Conference-ANTEC 2005", (2005).
  A.21 Kilinc, M. and Bayram, G., Mechanical Properties and Morphologies of PET-Based Ternary Composites. "The 63rd Annual Technical Conference-ANTEC 2005", (2005).
  A.22 Ozkoc, G., Bayram, G. and Bayramli, E., Twin-screw Extrusion of Short Glass Fiber Reinforced ABS/PA6 Blends: Mechanical and Morphological Properties. "The 21st Annual Meeting of The Polymer Processing Society, PPS-21", (2005).
  A.23 Kilinc, M., Yesil, S. and Bayram, G., Effect of Elastomer Type on Mechanical and Morphological Properties of PEN/PET Blend Based Composites. "The 22nd Annual Meeting of the Polymer Processing Society, PPS-22", (2006).
  A.24 Isik, I., Yilmazer, U. and Bayram, G., Impact Modified Polyamide-Organoclay Nanocomposites. "The 64th Annual Technical Conference-ANTEC’2006", (2006).
  A.25 Ozkoc, G., Bayram, G. and Bayramli, E., Compatibilization of ABS/PA6 Blends Using Olefin Based Polymers. "The 64th Annual Technical Conference-ANTEC’2006", (2006).
  A.26 Bayram, G. and Altan, C., Preparation and Characterization of Glass Fiber/Poly(ethylene terephthalate) Composites. "4th Chemical Engineering Conference for Collaborative Research in Eastern Mediterranean Countries", (2006).
  A.27 Yesil, S., Koysuren, O. and Bayram, G., Conductive Polymer Composites with Surface Modified Carbon Black. "The 22nd Annual Meeting of the Polymer Processing Society, PPS-22", (2006).
  A.28 Ozkoc, G., Bayram, G., Quaedflieg, M. and Tiesnitsch, J., Micro-compounding of ABS/PA6 Blends Based Nanocomposites: The Effects of Screw Geometry and Processing Conditions. "The 22nd Annual Meeting of the Polymer Processing Society, PPS-22", (2006).
  A.29 Isik, I., Yilmazer, U. and Bayram, G., Polyamide 6-Organoclay-Impact Modifier Nanocomposites. "2006 NSTI Nanotechnology Conference and Trade Show", (2006).
  A.30 Isik, I., Yilmazer, U. and Bayram, G., Polyamide-Impact Modifier-Organoclay Nanocomposites. "The 22nd Annual Meeting of the Polymer Processing Society, PPS-22", (2006).
  A.31 Pitcher, M.W., Sonmez, U., Eroglu, D., Nur, Y., Bayram, G. and Toppare, L., Batteries and a pinch of salt: A simple toolkit for the production of poly(methylsilyne), a precursor to silicon carbide ceramics. "American Chemical Society (ACS)", (2007).
  A.32 Ozkoc, G., Bayram, G. and Quadflieg M., Effects of Microcompounding Conditions and Microcompunder Screw Modification on the Properties of ABS/Polyamide-6 Blends Based Organoclay Nanocomposites. "The 23rd Annual Meeting of the Polymer Processing Society, PPS-23", (2007).
  A.33 Isik, I., Yilmazer, U. and Bayram, G., Morphology and Mechanical Properties of Impact Modified Polyamide-6/Organoclay Nanocomposites. "The Second Int. Conference on Advances in Petrochemicals and Polymers, ICAPP 2007", (2007), p.191.
  A.34 Yesil, S., Koysuren, O. and Bayram, G., Processing and Characterization of Electrically Conductive In-situ Microfiber Polymer Composites. "The 24th Annual Meeting of the Polymer Processing Society", (2008).
  A.35 Kilinc, M., Bayram, G., Yilmaz, A., Cakal, G., Eroglu, I. and Ozkar, S., Characterization of Flame Retardancy and Effect of Synergism on PET based Composites via Phosphate based Flame Retardant Additives. "The 24th Annual Meeting of Polymer Processing Society", (2008).
  A.36 Koysuren, O., Yesil, S., Bayram, G., Secmen, M. and Aydin Civi, O., Effect of Surface Treatment on Electrical and Microwave Properties of Carbon Black Filled PET Based Composites. "The 24th Annual Meeting of the Polymer Processing Society", (2008).
  A.37 Celebi, H., Bayram, G. and Dogan, A., Preparation and Characterization of Nanocomposites Based on Multiblock Polyester Elastomers. "EPF’09 European Polymer Congress", (2009), p.file: 49343.
  A.38 Eroglu, D. and Bayram, G., Flammability and Thermal Properties of Polypropylene/Silicon-based Preceramic Polymer Composites. "Seventeenth International Conference on Composites or Nano Engineering, ICCE-17", (2009).
  A.39 Donmez, S., Tuzenli, Z., Bayram, G. and Yilmaz S.S., Investigation of Usage of Si-based Polymers for Flame Retardancy of Polypropylene-based Composites. "6th Chemical Engineering Conference for Collaborative Research in Eastern Mediterranean Countries", (2010), p.129.
  A.40 Baltaci, B., Cakal, G.O., Bayram, G., Eroğlu, I. and Ozkar, S., Effect of Using Polymeric Additive on the Synthesis of Zinc Borate. "6th Chemical Engineering Conference for Collaborative Research in Eastern Mediterranean Countries", (2010), p.160.
  A.41 Yesil, S. and Bayram, G., Preparation and characterization of poly(ethylene terephthalate)/carbon nanotube composites with surface modified carbon nanotubes. "Annual Technical Conference-ANTEC 2010", (2010), p.1169-1175.
  A.42 Yesil, S. and Bayram, G., Surface Treatment of Carbon Nanotubes and Their Composites with Poly(ethylene terephthalate). "6th Chemical Engineering Conference for Collaborative Research in Eastern Mediterranean Countries", (2010), p.123.
  A.43 Celebi, H., Dogan, A. and Bayram, G., Synthesis, Processing and Characterization of the Thermoplastic Elastomer/Zinc Oxide Nanocomposites. "12th Mediterranean Congress of Chemical Engineering", (2011).
  A.44 Celebi, H., Bayram, G. and Dogan, A., Multiblock Polyester Elastomers/Zinc Oxide Composites: Preparation and Characterization . "European Technical Conference on Plastics (EUROTEC 2011 Conference)", (2011), p.1-7.
  A.45 Yesil, S. and Bayram, G., Microfiber Reinforced Polymer Composites Containing Carbon Nanotubes: Processing, Modification and Characterization . "7th Chemical Engineering Conference for Collaborative Research in Eastern Mediterranean Countries", (2012).
  A.46 Ersarac, F. N., Bayram, G. and Dogangun, A. A., Preparation and Characterization of Shape Memory CFRP Composites. "European Technical Conference on Plastics (EUROTEC 2013 Conference)", (2013), p.244-248.
  A.47 Camliyurt C. K. and Bayram G., Effects of Drawing Speed, and Type and Amount of Compatibilizer on Microfibrillar Reinforced Composites. "Twenty First Annual International Conference on Composites/Nano Engineering, ICCE-21", (2013).
  A.48 Sengor, I., Bayram, G. and Koysuren, O., Investigation on Shape Memory Behavior of Epoxy/Carbon Nanotube Composites. "Twenty First Annual International Conference on Composites/Nano Engineering, ICCE-21", (2013).
  A.49 Yasar, M., Bayram, G. and Celebi, H., Effect of Carbon Black and/or Elastomer on Thermoplastic Elastomer-based Blends and Composites. "30th International Conference of the Polymer Processing Society (PPS30)", (2014).
  A.50 Yasar, M., Bayram, G., Celebi, H., Effect of Carbon Black and/or Elastomer on Thermoplastic Elastomer-based Blends and Composites. "30th International Conference of the Polymer-Processing-Society (PPS)", 1664, (2015), p.120003.
  A.51 Sever, O., Celik, U., Erel-Goktepe, I., Bayram, G., Oral, A., Piezoelectric Properties of Layer-by-Layer Films. "11th Nanoscience and Nanotechnology Conference (NanoTR-11)", (2015).
  A.52 Sengor, I., Koysuren, O., Bayram, G., Epoxy-based Shape Memory Composites Containing Carbon-based Addtives. "Advances in Functional Materials 2015", (2015).
  A.53 Sezgi, N.A., Demir C. and Bayram G., Polypropylene/Boron Nitride Nanotube Composites-Synthesis, Modification, Processing and Characterization. "2016 MRS Fall Meeting", (2016).
  A.54 Ozkutlu Merve, Dilek Cerag, Bayram Goknur, Mechanical and Thermal Characterization of PMMA Syntactic Foams. "20th International Conference on Composite Structures", (2017), p.87.

Book and Chapter in a Book

  A.1 Bayram, G., Ozkoc., G. and Kurkcu, P., Improvement of Adhesion Between Poly(tetrafluoroethylene) and Poly(ethylene terephthalate) Films. "Polymer Surface Modification: Relevance to Adhesion", 4, (2007), p.241-250.

Publications (NATIONAL)

 

Conference Papers

  A.1 Başara, Ç., Yılmazer, Ü. and Bayram, G., Kil Takviyeli Epoksi Nanokompozitlerin Sentezlenmesi, Kil Tipinin ve Miktarının Morfolojik ve Mekanik Özelliklere Etkisi. "Beşinci Ulusal Kimya Mühendisliği Kongresi", (2002).
  A.2 Işık, I., Yılmazer, Ü. and Bayram, G., Epoksi Matriksli Nanokompozitlerin Darbe Dayanımının İyileştirilmesi. "Beşinci Ulusal Kimya Mühendisliği Kongresi", (2002).
  A.3 Durgun, H. and Bayram, G., Geri Kazanımdan Elde Edilmiş PET/PE Filmlerinin Prosesi ve Karakterizasyonu. "Beşinci Ulusal Kimya Mühendisliği Kongresi", (2002).
  A.4 Köysüren, Ö. and Bayram, G., Nylon 6/Karbon Siyahı Kompozitlerinin Mekanik ve Elektriksel Özellikleri. "Altıncı Ulusal Kimya Mühendisliği Kongresi", (2004).
  A.5 Kılınç, M. and Bayram, G., Proses Parametrelerinin ve Cam Fiber Oranının Geri Kazanılmış PET/Cam Fiber Kompozitlerinin Mekanik ve Termal Özellikleri ile Morfolojilerine olan Etkileri. "Altıncı Ulusal Kimya Mühendisliği Kongresi", (2004).
  A.6 Özkoç, G., Bayram, G. and Bayramlı, E., Kısa Cam Elyaf/ABS Kompozitlerinde Ara Yüzeydeki Yapışmanın Polyamid Katkısı ile Artırılması. "Altıncı Ulusal Kimya Mühendisliği Kongresi", (2004).
  A.7 Ozkoç, G., Bayram, G. ve Bayramlı, E., ABS/Poliamid Polimer Karışımlarının Hazırlanması ve Karakterizasyonu. "Birinci Ulusal Polimer Bilim ve Teknolojisi Kongresi ve Sergisi", (2006).
  A.8 Işık, I., Yılmazer, U. ve Bayram, G., Darbe Dayanımı Geliştirilmiş Poliamid 6-Organokil Nanokompozitleri. "Birinci Ulusal Polimer Bilim ve Teknolojisi Kongresi ve Sergisi", (2006).
  A.9 Özbek, M. O., Özgen, C. ve Bayram, G., Ekstrüzyon İşleminde Poli(etilen tereftalat) Bozunmasının Algısal Model Öngörümlü Denetleç ile Denetlenmesi. "Otomatik Kontrol Ulusal Toplantısı, TOK'06", (2006).
  A.10 Özkoç, G., Bayram, G. ve Bayramlı, E., Kısa Cam Elyaf Takviyeli ABS/PA6 Karışımlarının Mekanik Özellikleri ve Morfolojileri. "Birinci Polimerik Kompozitler Sempozyumu ve Sergisi", (2006).
  A.11 Kılınç, M. ve Bayram, G., Çinko Borat Katkılı Polipropilen Bazlı Kompozitlerin Yanma Davranışları ve Mekanik Özellikleri. "Üçüncü Uluslararası Bor Sempozyumu", (2006).
  A.12 Yeşil, S., Kılınç, M. ve Bayram, G., Polietilen Terftalat/Polietilen Naftalat Bazlı Nanokompozitlerin Üretimi ve Karakterizasyonu. "Birinci Ulusal Polimer Bilim ve Teknolojisi Kongresi ve Sergisi", (2006).
  A.13 Köysüren, O., Yeşil, S. ve Bayram, G., Karbon Bazlı Dolgu Maddesi İçeren Polietilen Terftalat Kompozitlerinin Mekanik ve Elektriksel Özellikleri. "Birinci Ulusal Polimer Bilim ve Teknolojisi Kongresi ve Sergisi", (2006).
  A.14 Işık, I., Yılmazer, U. ve Bayram, G., Poliamid 6 Bazlı Üçlü Nanokompozitlerin Mekanik Özelliklerinin ve Morfolojilerinin Belirlenmesi. "Birinci Polimerik Kompozitler Sempozyumu ve Sergisi", (2006), s.331-342.
  A.15 Kilinc, M., Yesil, S., Cakal G., Bayram G., Ozkar, S. and Eroglu, I., Production and Characterization of Hydrated Zinc Borate. "SOMER Symposium Series I", (2007), s.51:51.
  A.16 Kilinc, M. and Bayram, G., Flame Retardancy and Mechanical Properties of Polypropylene Based Composites. "SOMER Symposium Series I", (2007), s.51:51.
  A.17 Yesil, S., Koysuren, O. and Bayram, G., In-Situ Microfiber Reinforcement of Conductive Polymer Composites. "SOMER Symposium Series 1", (2007), s.50:50.
  A.18 Işık, I., Yılmazer, U. ve Bayram, G., Polieter Poliol ile Modifiye Edilmiş Epoksi Matrisli Nanokompozitlerin Eğilme Özellikleri ve Morfolojisi. "13. Ulusal Kil Sempozyumu", (2007), s.500-509.
  A.19 Koysuren, O., Yesil, S. and Bayram, G., Effect of Solid State Grinding Technique on Microstructured Blends of Incompatible Polymers. "SOMER Symposium Series 1", (2007), s.52:52.
  A.20 Isik, I., Yilmazer, U. and Bayram, G., Flexural Properties and Morphology of Impact Modified Polyamide-6/Organoclay Nanocomposites. "SOMER Symposium Series I", (2007), s.49:49.
  A.21 Kılınç, M., Yeşil, S., Çakal, G., Bayram, G., Eroğlu, I. and Özkar, S., 3.5 Mol Kristal Sulu Çinko Boratın Pilot Ölçekte Üretimi ve Karakterizasyonu. "II. Ulusal Bor Çalıştayı", (2008), s.125-131.
  A.22 Eroğlu, D., Bayram, G. and Pitcher, M. W., Elektrokimyasal Polimerizasyon ile Poli(metilsilin) Sentezi. "Sekizinci Ulusal Kimya Mühendisliği Kongresi", (2008).
  A.23 Özkoç, G., Bayram, G. and Bayramlı, E., ABS/Polyamid-6 Karışımlarının Darbe ile Kırılma Tokluğu Davranışının İncelenmesi. "İkinci Ulusal Polimer Bilim ve Teknolojisi Kongresi ve Sergisi", (2008).
  A.24 Yeşil, S., Köysüren, Ö. and Bayram, G., Poli(etilen tereftalat)/Karbon Nanotüp Kompozitlerinin Elektriksel ve Mekanik Özelliklerinin Geliştirilmesi. "Sekizinci Ulusal Kimya Mühendisliği Kongresi", (2008).
  A.25 Celebi, H., Bayram, G. and Dogan, A., Electrical Properties of Thermoplastic Elastomers Containing ZnO Nanoparticles. "5. Ulusal Nanobilim ve Nanoteknoloji Konferansı", (2009), s.32.
  A.26 Çelebi, H., Bayram, G. ve Doğan, A., The Surface Modification of ZnO and Its Effect on the Properties of Polymer Nanocomposites. "6. Ulusal Nanobilim ve Nanoteknoloji Konferansı", (2010), s.742.
  A.27 Yeşil S. and Bayram G., Mikrolifsel Güçlendirme Yöntemi Kullanılarak Hazırlanan Polietilen/Poli(etilen tereftalat)/Karbon Nanotüp Kompozitlerinin Elektriksel ve Mekanik Özelliklerinin İncelenmesi. "3. Ulusal Polimer Bilim ve Teknoloji Kongresi ve Sergisi", (2010), s.21.
  A.28 Kılınç, M., Bayram, G., Yılmaz, A., Çakal, G.Ö., Eroğlu, İ. ve Özkar S.;, Poli(etilen tereftalat) (PET) bazlı Kompozitlere Fosfat ve Bor Bazlı Alev Geciktiricilerin Sinerjist Etkileri ve Kompozitlerin Yanma Davranışları ile Mekanik Özelliklerinin Belirlenmesi. "3. Ulusal Polimer Bilim ve Teknoloji Kongresi ve Sergisi", (2010), s.46.
  A.29 Çelebi, H., Bayram, G. ve Doğan, A., Poli(eter ester) / ZnO Kompozitlerinin Hazırlanması, ZnO Türünün ve Miktarının Kompozitlerin Isıl Özelliklerine Etkisinin İncelenmesi. "3. Ulusal Polimer Bilim ve Teknoloji Kongresi ve Sergisi", (2010), s.48.
  A.30 Baltacı, B., Çakal, G.Ö., Bayram, G., Eroğlu, İ. ve Özkar, S., Yüzey Etkin Madde Türünün Çinko Borat Sentezine Etkisi. "9. Ulusal Kimya Mühendisliği Kongresi - UKMK-9", (2010).
  A.31 Yesil, S., Winkelmann, C., La Saponara, V. ve Bayram., G., Epoksi/Karbon Nanotüp İletken Polimer Kompozitlerinin Cam Fiber Destekli Kompozit Panellerin Yapısal Hasarlarının Belirlenmesinde Kullanımı. "9. Ulusal Kimya Mühendisliği Kongresi, UKMK-9", (2010).
  A.32 Şengör, İ., Bayram, G. ve Köysüren, Ö., Epoksi Bazlı Şekil Hafızalı Polimerler. "10. Ulusal Kimya Mühendisliği Kongresi, UKMK-10", (2012).
  A.33 Ersaraç,F.N., Bayram G. ve Doğangün Akın, A., Şekil Hafızalı Polimer Bazlı Kompozit Malzemeler ve Havacılık Uygulamaları. "10. Ulusal Kimya Mühendisliği Kongresi, UKMK-10", (2012).
  A.34 Yaşar, M., Bayram, G. ve Çelebi, H., Termoplastik Elastomer-Bazlı Kompozitlerin Şekil Hafıza Özellikleri. "11. Ulusal Kimya Mühendisliği Kongresi", (2014), s.438-439.
  A.35 Yürekli, E. ve Bayram, G., Epoksi-bazlı Polimer Kompozitleri: Alev Geciktirici ve Mekanik Özellikleri. "11. Ulusal Kimya Mühendisliği Kongresi", (2014), s.350-351.
  A.36 Balık, E., Bayram, G. ve Sezgi, N.A., Polistiren-Bor Nitrür Nanotüp Kompozitlerinin Hazırlanması ve Karakterizasyonu. "11. Ulusal Kimya Mühendisliği Kongresi", (2014), s.414-415.
  A.37 Erkmen, B. ve Bayram, G., Polistiren Bazlı Çok Katmanlı Kompozitlerin Hazırlanması ve Özelliklerinin Geliştirilmesi. "VI. Ulusal Polimer Bilim ve Teknolojisi Kongresi", (2016), s.113.
  A.38 Özkutlu, M., Dilek-Hacıhabiboğlu, Ç. ve Bayram, G., Poli(metil metakrilat) Köpük Üretimi ve Karakterizasyonu. "12. Ulusal Kimya Mühendisliği Kongresi, UKMK-12", (2016).
  A.39 Şahin Selin, Bayram Göknur, Influence of Material Parameters on Electrospun Polyamide 6-Based Composite Nanofibers . "13th NANOSCIENCE AND NANOTECHNOLOGY CONFERENCE (NANOTR-13)", (2017), s.294.
  A.40 Erkmen Berrak, Bayram Göknur, Impact Modified Polystyrene-Based Nanocomposites: Mechanical and Shape Memory Properties. "13th NANOSCIENCE AND NANOTECHNOLOGY CONFERENCE (NANOTR-13)", (2017), s.321.
<< back