Academic Staff Roster includes academic activity information for 2017 and before; therefore the visible titles of faculty members may not be up to date. Academic activity information for 2018 and onwards can be tracked through AVESIS (Academic Data Management System).

Prof.Dr. CEMİL HAKAN GÜR
FACULTY OF ENGINEERING
PublicationsResearchMembership & Awards
E-mail :  
Url :  -
Phone :  +90312210 2511
Fax :  +903122102518
Address :
 

Education

  Bachelor's, Middle East Technical University, Metallurgical & Materials Eng.
  Master's, Middle East Technical University, Metallurgical & Materials Eng.
  Doctorate, Middle East Technical University, Metallurgical & Materials Eng.

Publications (INTERNATIONAL)

Journal Papers

  A.1 Gür, C.H., Quality Management System in NDT Laboratories: Accreditation as a Testing Laboratory. "INSIGHT (The Journal of the British Institute of NDT)", 40, (1998), p.621-623.
  A.2 Gür, C.H., Tahribatsız Muayene Laboratuvarlarının Akreditasyonu. "1st International Nondestructive Testing Symposium", 1, (1999), p.47-54.
  A.3 Gür, C.H., Investigation of SiCp Reinforced Aluminium Matrix Composites by Shear and Longitudinal Ultrasonic Waves. "INSIGHT", 43, (2001), p.748-750.
  A.4 Gür, C.H. and Aydınmakina, B., Microstructural Characteristion of Ductile Irons by Measuring Velocity and Apparent Attenuation of Ultrasonic Waves. "INSIGHT", 43, (2001), p.731-734.
  A.5 Gür, C.H. and Ataş, E., Determination of Reinforcement Content and Microstructure of SiC Particle Reinforced Aluminium Matrix Composites by Ultrasonic Measurements. "Technical Paper", (2001), p.1-6.
  A.6 Gür, C.H. and Tekkaya, A.E., Numerical Investigation of Non-homogeneous Plastic Deformation in Quenching Process. "Materials Science & Engineering A", A319-321, (2001), p.164-169.
  A.7 Gür, C.H., Investigation of the Influence of Specimen Geometry on Quench Behaviour of Steels by X-ray Determination of Surface Residual Stresses. "International Journal of Mechanical Sciences", 44, (2002), p.1335-1347.
  A.8 Gür CH, Keleş Y, Ultrasonic characterisation of hot-rolled and heat-treated plain carbon steels . "INSIGHT J. of British Inst. of NDT", 45, (2003), p.615-620.
  A.9 Gür CH, Arda EB, Effect of tube spinning and subsequent heat treatments on strength, microstructure and residual stress state of AISI/SAE 4140 steel. "Mater. Sci. and Technology", 19, (2003), p.1590-1594.
  A.10 Gür CH, Investigation of microstructure-velocity relationship in SiCp reinforced aluminium metal matrix composites. "Mater. Sci. Eng. A", 361, (2003), p.29-35.
  A.11 Gür CH., Yıldız, İ., Non-destructive investigation on the effect of precipitation hardening on impact toughness of 7020 Al-Zn-Mg alloy. "Mater Sci Eng A", 382/1-2, (2004), p.395-400.
  A.12 C. Hakan Gür, B. Orkun Tuncer, Nondestructive investigation of the effect of quenching and tempering on medium-carbon low alloy steels. "Int J Microstructure and Materials Properties", 1, (2005), p.51-60.
  A.13 C. Hakan Gür, B. Orkun Tuncer, Microstructural investigation of SAE 1040 steel specimens by ultrasonic measurements. "INSIGHT – J British Inst of NDT", 47, (2005), p.421-424.
  A.14 Abdullah Öztürk, C. Hakan Gür, Determination of the influence of TiO2 on the elastic properties of a mica based glass ceramic by ultrasonic velocity measurements. "Journal of Non-Crystalline Solids", 351, (2005), p.3655-3662.
  A.15 C Hakan Gür, B Orkun Tuncer, Characterization of microstructural phases of steels by sound velocity measurement. "Materials Characterization", 55, (2005), p.160-166.
  A.16 Gür CH, Çam İ, Investigation of as-quenched and tempered commercial steels by Magnetic Barkhausen Noise method. "Int J Microstructure and Materials Properties", 1, (2006), p.208-218.
  A.17 Kemal Davut, C Hakan Gür, Monitoring the microstructural changes during tempering of quenched SAE 5140 steel by magnetic Barkhausen noise. "J Nondestructive Evaluation", 26, (2007), p.107-113.
  A.18 Z Gacsi, C Hakan Gür, A Makszimus, T Pieczonka, Investigation of Microstructure Inhomogeneity in SiCp-reinforced Aluminum Matrix Composites. "Materials Science Forum", 534-536, (2007), p.901-904.
  A.19 F Kretz, Z Gacsi, C Hakan Gür, Microstructure Characterization of SiCp-reinforced Aluminum Matrix Composites by Newly Developed Computer-based Algorithms. "Materials Science Forum", 534-536, (2007), p.909-912.
  A.20 Gür C Hakan, Çam İbrahim, Comparison of magnetic Barkhausen noise and ultrasonic velocity measurements for microstructure evaluation of SAE 1040 and SAE 4140 steels. "Materials Characterization", 58, (2007), p.447-454.
  A.21 Mücahit Kaplan, C Hakan Gür, Mehmet Erdoğan, Characterization of dual-phase steels using magnetic Barkhausen noise technique,. "J Nondestructive Evaluation", 26, (2007), p.79-87.
  A.22 Makszimus A, Gacsi Z, Gür CH, Investigation of the Microstructure and Hardness of SiC Reinforced Aluminum Matrix Composites. "Materials Science Forum", 589, (2008), p.239-244.
  A.23 Saraloğlu E, Tan E, Gür CH, Effect of ECAP and Post-aging Processes on 2024 Aluminum Alloy. "Steel Research International - Metal Forming special issue", 79/2, (2008), p.467-471.
  A.24 Gür CH, Yıldız, I, Utilization of Non-destructive Methods for Determining the Effect of Age-Hardening on Impact Toughness of 2024 Al-Cu-Mg Alloy. "J Nondestructive Evaluation", 27, (2008), p.99-104.
  A.25 Karpuz P, Şimşir C, Gür CH, Kim SK, Finite Element Investigation of the Effect of Hardening Behavior of Alloys on Equal Channel Angular Pressing Performance. "Materials Science Forum", 584-586, (2008), p.1021-1026.
  A.26 Gür CH, Özer M, Erdoğan M, Investigation of the Variations in Microstructure and Mechanical Properties of Dual Matrix Ductile Iron by Magnetic Barkhausen Noise Analysis. "Research in ND Evaluation", 19, (2008), p.44-60.
  A.27 Şimşir C, Gür CH, 3D FEM Simulation of Steel Quenching and Investigation of the Effect of Asymmetric Geometry on Residual Stress Distribution. "Journal of Materials Processing Technology", 207, (2008), p.211-221.
  A.28 Şimşir C, Gür CH, A FEM based Framework for Simulation of Thermal Treatments: Application to Steel Quenching. "Computational Materials Science", 44, (2008), p.588-600.
  A.29 Şimşir C, Gür CH, A Review on Modeling and Simulation of Quenching. "Journal of ASTM International", 6, (2009), p.1-29.
  A.30 Karpuz P, Şimşir C, Gür CH, Investigating the Effects of Hardening Behavior of Aluminum Alloys on Equal Channel Angular Pressing – A Finite Element Study. "Mater Sci Eng A", 503, (2009), p.148-151.
  A.31 Karpuz P, Şimşir C, Gür CH, Simulation of equal channel angular pressing applied to produce structures with ultrafine-sized grains. "Int J Microstructure and Materials Properties", 4, (2009), p.356-36.
  A.32 Tan E, Gür CH, Influence of DCAP Process on the Mechanical Properties of 6061 Al-Alloy Sheet. "Reviews on Advanced Materials Science", 25, (2010), p.189-193.
  A.33 Şimşir, C, Gür CH, A Simulation of the Quenching Process for Predicting Temperature, Microstructure and Residual Stresses. "Journal of Mechanical Engineering", 56, (2010), p.93-103.
  A.34 Şimşir C, Karpuz P, Gür CH, Quantitative Analysis of the Influence of Strain Hardening on Equal Channel Angular Pressing Process. "Computational Materials Science", 48, (2010), p.633–639.
  A.35 Savaş S, Gür CH, Monitoring Variation of Surface Residual Stresses in the Shot Peened Steel Components by Magnetic Barkhausen Noise Method. "INSIGHT - Journal of British Institute of NDT", 52, (2010), p.672-677.
  A.36 Bayramoglu S, Gür CH, Alexandrov I, Abramova MM, Characterization of Ultra-Fine Grained Steel Samples Produced by High Pressure Torsion via Magnetic Barkhausen Noise Analysis. "MATERIALS SCIENCE AND ENGINEERING A", 527, (2010), p.927–933.
  A.37 Yelbay I, Çam I, Gür CH, Non Destructive Determination of Residual stress State in Steel Weldments by Magnetic Barkhausen Noise Technique. "NDT&E International", 43, (2010), p.29-33.
  A.38 Davut K, Gür CH, Monitoring the Microstructural Evolution in Spheroidized Steels by Magnetic Barkhausen Noise Measurements. "JOURNAL OF NONDESTRUCTIVE EVALUATION", 29, (2010), p.241-247.
  A.39 Oral I, Guzel H, Ahmetli G, Gür CH, Determining the Elastic Properties of Modified Polystyrenes by Sound Velocity Measurements. "Journal of Applied Polymer Science", 121, (2011), p.3425 3432.
  A.40 Tan E, Kibar AA, Gür CH, Mechanical and Microstuctural Characterization of 6061 Aluminum Alloy Strips Severely Deformed by Dissimilar Channel Angular Pressing. "Materials Characterization", 62, (2011), p.391-397.
  A.41 Maradit P, Şimşir C, Lübben T, Gür CH, Metallurgical Influence on Quench Distortion of SAE 52100 Long Cylinders. "International Heat Treatment and Surface Engineering", 5, (2011), p.57-60.
  A.42 Gür CH, Şimşir C, Simulation of Quenching – A Review (Paper ID MPC104479). "Materials Performance and Characterization", 1, (2012), p.1-37.
  A.43 Tolungüç B, Yurtışık K, Tirkeş S, Gür CH, Batıgün C, Ertürk MT, 2205 Dubleks Paslanmaz Çeliklerinin Hibrit Plazma Ark Kaynaklı Birleştirmelerinde Mikroyapı Dönüşümleri. "Mühendis ve Makina", 53, (2012), p.77-82.
  A.44 Mofid M.A, Abdollah-zadeh A, Malek Ghaini F, Gür CH, Submerged Friction Stir Welding (SFSW) under Water and under Liquid Nitrogen: An improved method to join Al alloys to Mg alloys. "Metallurgical & Materials Trans. A", 43A, (2012), p.5106-5114.
  A.45 Kotan G, Tan E, Kalay YE, Gür CH, Homogenization of ECAPed Al 2024 Alloy through Age Hardening. "Mater Sci Eng A", 559, (2013), p.601-606.
  A.46 Yurtisik K, Tirkes S, Dykhno I, Gur CH, Gurbuz R, Characterization of Duplex Stainless Steel Weld Metals Obtained by Hybrid Plasma- Gas Metal Arc Welding. "Soldag. Insp.", 18, (2013), p.207-216.
  A.47 Garipova N, Batıgün C, Gür CH, Numerical and Experimental Determination of the Residual Stress State in Multi-pass Welded API 5LX70 Plates, Materials Testing. "Materialsprüfung", 56, (2014), p.831-836.
  A.48 Mofid MA, Abdollah-zadeh A, Gür CH, Investigating the Formation of Intermetallic Compounds during Friction Stir Welding of Magnesium Alloy to Aluminum Alloy in Air and under Liquid Nitrogen. "Int J Advanced Manufacturing Technology", 71, (2014), p.1493-1499.
  A.49 Gür CH, Erian G, Batıgün C, Çam İ, Investigating the Effects of Subsequent Weld Passes on Surface Residual Stresses in Steel Weldments by Magnetic Barkhausen Noise Method. "Materials Evaluation", 74, (2016), p.418-423.
  A.50 Kotan G, Kalay YE, Gür CH, Long-Term Thermal Stability of Equal Channel Angular Pressed 2024 Aluminum Alloy. "Mater Sci Eng A", 677, (2016), p.307 - 315.
  A.51 Hizli H, Gür CH, Comparison of Electronic Speckle Laser Interferometry Hole-Drilling and X-ray Diffraction Techniques for Determination of Residual Stresses in the Heat Treated Steels. "J Nondestructive Evaluation", 36, (2017), p.42.
 

Conference Papers

  A.1 Gür, C.H., Schuler, W. and Tekkaya, A.E., Investigation of Quench Behaviour of Eccentrically Drilled Steel Cylinders. "11th Congress of Int. Fed. for Heat Treatment and Surface Eng.", 3, (1998), p.281-290.
  A.2 Gür, C.H., Accreditation of a Nondestructive Testing Laboratory. "3rd International Conference on Certification and Standardization on Nondestructive Testing", (1999).
  A.3 Gür, C.H., Finite Element Simulation of Quench Hardening. "NATO-ASI: Multiscale Phenomena in Plasticity", (1999).
  A.4 Gür, C.H. and Ataş, E., Determination of Properties of SiC Reinforced Aluminium Metal Matrix Composites by Ultrasonic Techniques. "15th World Conference on NDT", CD, (2000), p.idn036.htm.
  A.5 Ataş, E. and Gür, C.H., SiC Katkılı Aluminyum Metal Matriks Kompozitlerin Özelliklerinin Ultrasonik Tekniklerle Belirlenmesi. "10th International Metallurgy and Materials Congress", 1, (2000), p.591-598.
  A.6 Gür, C.H. and Aydınmakina, B., Non-destructive Characterization of Nodular Cast Irons by Ultrasonic Methods. "15th World Conference on NDT", CD, (2000), p.idn035.
  A.7 Aydınmakina, B. and Gür, C.H., Küresel Dökme Demirlerde Malzeme Özelliklerinin Ultrasonik Ölçümlerle Tesbiti. "10th International Metallurgy and Materials Congress", 1, (2000), p.647-654.
  A.8 Günay, E., Nazlım, A. and Gür, C.H., A Finite Element Model for Deformation of Laminated Cylinders with Orthogonal Stiffeners under Internal Pressure. "10th International Metallurgy and Materials Congress", 2, (2000), p.1299-1310.
  A.9 Gür, C.H. and Gümrükçüoğlu, M., Present Situation of NDT in Turkey. "15th World Conference on NDT", CD, (2000), p.idn034.
  A.10 Gür, C.H., Quality Management and Accreditation of NDT Laboratories. "15th World Conference on NDT", CD, (2000), p.idn033.
  A.11 Gür, C.H. and Aydınmakina, B., Ultrasonic Investigation of Graphite Nodularity in Ductile Cast Irons. "NDT in Application, Development and Research", CD, (2001), p.33.
  A.12 Gür, C.H. and Arda, E.B., Sıvama İşleminin AISI/SAE 4140 Çelik Boruların Mekanik Özelliklerine ve Mikroyapısına Etkisi. "11th International Metallurgy and Materials Congress", CD-ROM, (2002), p.1399-1406.
  A.13 Gür, C.H., Prediction of Reinforcement State and Mechanical Properties of SiC Particle Reinforced Al-Matrix Composites by Transverse and Longitudinal Waves. "European Conference on Nondestructive Testing", CD-ROM, (2002).
  A.14 Gür, C.H., Ultrasonic Investigation of SiC-particle Reinforced Aluminium Matrix Composites. "Annual Congress of German NDT Society (DGZfP)", (2002).
  A.15 Akdur, R.E., Gür, C.H., Simulation of quenching using Ansys software to investigate the evolution of thermal stresses and local plastic deformation. "Book of Abstracts - 2nd Int. Conf. Thermal Process Modelling and Comp. Simul.", 1, (2003), p.56.
  A.16 Gür CH, Tuncer BO, Investigating the Microstructure-Ultrasonic Property Relationships in Steels . "16th World Conf on NDT, Montreal", (2004), p.7.
  A.17 Gür CH, Yıldız İ, Determining the Impact Toughness of Age-Hardened 2024 Al-Alloy by Nondestructive Measurements. "16th World Conf on NDT, Montreal", (2004), p.7.
  A.18 Réti T, Felde I, Gür CH, Modeling of Reversible Austenite/Ferrite Transformations of Low Carbon Steels in the Intercritical Temperature Range. "14th IFHTSE Congress", 25, (2004), p.702-705.
  A.19 Kemal Davut, C. Hakan Gür, Su verilmiş ve menevişlenmiş SAE 4140 çeliğinde manyetik Barkhausen gürültüsü yöntemi ile Tahribatsız iç yapı karakterizasyonu. "CD Proc of 12th Int Metallurgy and Materials Cong. 28 Sept-2 Oct 2005 İstanbul", (2005), p.896-902.
  A.20 C. Hakan Gür, Ultrasonik boyuna dalga hız ölçümleri ile SiC katkılı Al metal matrisli kompozitlerde mikroyapı tayini. "CD Proc. 4th Int Powder Metallurgy Conf, 18-22 May 2005 Sakarya", (2005), p.439-446.
  A.21 M. Reger, B. Vero, Zs. Csepeli, C. Hakan Gür, The role of intercritical Jominy test in the development of DP and Trip steels. "Proc of 1st Int Conf on Heat Treatment and Surface Engineering of Tools and Dies, 08-11 June Croatia", 1, (2005), p.411-416.
  A.22 Caner Şimşir, C. Hakan Gür, Kalıntı gerilmeler ve şekil bozulmasının tahmini için çeliklere su verme işleminin sonlu eleman yöntemi ile simulasyonu. "CD Proc of 12th Int Metallurgy and Materials Cong., 28 Sept-2 Oct 2005 İstanbul", (2005), p.1753-1762.
  A.23 Çağlar Sönmez, A. Erman Tekkaya, C. Hakan Gür, Comparison of Deep Drawability of Aluminum and Steel using Numerical Simulation Experiments. "Proc.of 6st Int Conf and Workshop on Numerical Simulation of 3D Sheet Forming Processes, 15-19 Aug", 1, (2005), p.119-124.
  A.24 C. Hakan Gür, İbrahim Çam, Non-destructive characterisation of quenched/tempered AISI/SAE 1040 steel by magnetic Barkhausen noise and sound velocity measurements. "Proc. of 5th Int Conf on Barkhausen Noise and Micromagnetic Testing, 2-3 June 2005 Petten", 1, (2005), p.29-36.
  A.25 T. Réti T, I. Felde I, O. Kolankaya O, C. Hakan Gür, Ötektoidaltı çeliklerde Ae1-Ae3 sıcaklık aralığında östenit/ferrit faz dönüşümü için kinetik model. "CD Proc of 12th Int Metallurgy and Materials Cong., 28 Sept-2 Oct 2005 İstanbul", (2005), p.1777-1783.
  A.26 Caner Şimşir, C. Hakan Gür, FE simulation of steel quenching to investigate residual stresses and distortion. "Proc of 1st Int Conf on Distortion Engineering, 14-16 September 2005 Bremen", 1, (2005), p.407-414.
  A.27 C. Hakan Gür, B. Orkun Tuncer, Determination of the effect of quenching and tempering on AISI/SAE 5140 steel by sound velocity measurements. "Proc. of 1st Jordanian Int Conf of Mater Sci and Eng, 3-5 May 2005 Al-Salt", 1, (2005), p.230-235.
  A.28 Davut K, Gür CH, Manyetik Barkhausen Gürültüsü Yöntemi ile Çeliklerde Tane Boyutunun Tayini. "Proc. of 11th Denizli Materials Symposium, 19-21 April 2006,", Symp. Proc, (2006), p.893-898.
  A.29 C.H.Gür, İ.Çam, Comparison of Magnetic Barkhausen Noise and Sound Velocity Measurements for Characterisation of Steel Microstructures. "CD Proc of 9th European Conf. on NDT, 25-29 Sept 2006 Berlin", CD Proc, (2006), p.Mo.2.2.4.
  A.30 Dereli A, Gür CH, Öztürk A, Mika cam seramiğinin elastic özelliklerinin ultrasonic ölçümlerle belirlenmesi. "CD Proc of 13th Int Metallurgy-Materials Cong., 9-12 Nov 2006 İstanbul", CD Proc, (2006), p.382-389.
  A.31 Küçükyılmaz A, Gür, CH, Çam İ, AISI 52100 rulman çeliğinden imal edilmiş makaralarda manyetik Barkhausen gürültüsü tekniği ile yüzey kalıntı gerilmelerinin tayini. "CD Proc of 13th Int Metallurgy-Materials Cong., 9-12 Nov 2006 İstanbul", CD Proc, (2006), p.697-705.
  A.32 Davut K, Gür CH, Çam İ, Su verilmiş SAE 1040 çeliğinde menevişleme sıcaklığının içyapıya etkisinin manyetik Barkhausen gürültüsü yöntemi ile tayini,. "CD Proc of 13th Int Metallurgy-Materials Cong., 9-12 Nov 2006 İstanbul", CD Proc, (2006), p.419-426.
  A.33 Karpuz P, Şimşir C, Gür CH, Simulation of equal channel angular pressing applied to produce structures with nano-size grains. "CD Proc of 13th Int Metallurgy-Materials Cong., 9-12 Nov 2006 İstanbul", CD Proc, (2006), p.1454-1463.
  A.34 Kretz F, Gür CH, Gacsi Z, Characterization of the microstructures of SiC particle reinforced aluminum matrix composites by a new image processing algorithm. "CD Proc of 13th Int Metallurgy-Materials Cong., 9-12 Nov 2006 İstanbul", CD Proc, (2006), p.889-895.
  A.35 Kaplan M, Gür CH, Erdoğan M, Çift fazlı çeliklerde manyetik Barkhausen gürültüsü yöntemi ile tahribatsız içyapı karakterizasyonu. "CD Proc of 13th Int Metallurgy-Materials Cong., 9-12 Nov 2006 İstanbul", CD Proc, (2006), p.1388-1394.
  A.36 Boyacıoğlu B, Gür CH, Ae1-Ae3 kritik sıcaklık aralığından su verilen ötektoidaltı çeliklerde manyetik Barkhausen gürültüsü yöntemi ile içyapı karakterizasyonu. "CD Proc of 13th Int Metallurgy-Materials Cong., 9-12 Nov 2006 İstanbul", CD Proc, (2006), p.711-717.
  A.37 K.Davut, C.H.Gür, X.Kleber, Characterisation of Quenched and Tempered Steels by Magnetic Barkhausen Noise Method. "CD Proc of 9th European Conf. on NDT - 25-29 Sept 2006", CD Proc, (2006), p.P108.
  A.38 Şimşir C, Gür CH, Bilgisayar simulasyonu yardımıyla su verme işlemleri sonucunda çelik iş parçalarında oluşan mikroyapının ve kalıntı gerilmelerin tayini. "CD Proc of 13th Int Metallurgy-Materials Cong., 9-12 Nov 2006 İstanbul", CD Proc, (2006), p.646-659.
  A.39 Kemal Davut, C Hakan Gür, Investigating the Efficiency of Magnetic Barkhausen Noise Method for Determining Average Grain Size of Steels. "6th Int Conf on Barkhausen Noise and Micromagnetic Testing, 9-10 July 2007 Valenciennes", (2007).
  A.40 Mücahit Kaplan, C Hakan Gür, Mehmet Erdoğan, Characterisation of Dual Phase Steels by Magnetic Barkhausen Noise Method. "6th Int Conf on Barkhausen Noise and Micromagnetic Testing, 9-10 July 2007 Valenciennes", (2007).
  A.41 Kemal Davut, Sadık Bayramoğlu, Göksu Gürer, C Hakan Gür, Non-destructive Characterization of Spheroidised AISI 1060 Steel by Magnetic Barkhausen Noise Measurements. "6th Int Conf on Barkhausen Noise and Micromagnetic Testing, 9-10 July 2007 Valenciennes", (2007).
  A.42 Gür CH, Kılıçlı V, Erdoğan M, Investigating the Austempering Parameters of Ductile Iron by Magnetic Barkhausen Noise Technique. "CD Proc 17th World Conf NDT, 25-28 Oct 2008, Shanghai", (2008).
  A.43 Gür CH, Özer M, Erdoğan M, The Evaluation of Structure-Property Relationships in the Dual Matrix Ductile Iron by Magnetic Barkhausen Noise Analysis. "CD Proc 17th World Conf NDT, 25-28 Oct 2008, Shanghai", (2008).
  A.44 Karpuz P, Şimşir C, Gür CH, Kim SK, Finite Element Investigation of the Effect of Hardening Behavior of Alloys on Equal Channel Angular Pressing Performance. "4th Int Conf on Nanomaterials by Severe Plastic Deformation, 18-22 August 2008 Goslar", (2008), p.1021-1026.
  A.45 Gür CH, Davut K, Non-destructive Characterization of Pearlite Spheroidization by Magnetic Barkhausen Noise Method. "CD Proc 17th World Conf NDT - Shanghai 25-28 Oct 2008", (2008).
  A.46 Şimşir C, Gür CH, A New Framework for Simulation of Heat Treatments. "Proc of 2nd Int Conference - Distortion Engineering, 17-19 Sept 2008 Bremen", (2008), p.471-479.
  A.47 Davut K, Gür CH, Monitoring the Microstructural Evolution in Spheroidised Steel by Magnetic Barkhausen Noise Measurement. "7th Int Conf on Barkhausen Noise and Micromagnetic Testing", 1, (2009), p.143-150.
  A.48 Maradit P, Şimşir C, Lübben T, Gür CH, Metallurgical Influence on Quench Distortion of SAE 52100 Long Cylinders. "CD Proceedings of 18th IFHTSE Cong", (2010), p.5522-5530.
  A.49 Yelbay I., Cam I., Gur H, Prediction of Surface Residual Stresses in Butt-Welded Steel Plates by Magnetic Barkhausen Noise Analysis. "CD Proceedings 10th European Conference on NDT, 06-11 June 2010, Moscow-Russia", (2010), p.paper no1.01.03.
  A.50 Gür CH, Nondestructive Monitoring of Surface Residual Stresses in Steels by Magnetic Barkhausen Noise Technique: Welded Plates and Shot-peened Components. "Proc. of 3rd Int. Conf. On Distortion Eng., 14-16 Sept 2011, Bremen", (2011), p.361-368.
  A.51 Tan E, Gür CH, Simon A, Gacsi Z, Investigating the Microstructure of Hot-Pressed SiC Reinforced AlCu and AlSi Alloy Composites by Ultrasonic Technique. "6th Int. Powder Metallurgy Cong, 5-7 Oct 2011, Ankara", (2011), p.140-146.
  A.52 Gür CH, Savaş S, Measuring the Surface Residual Stresses in Shot-Peened Steel Components by Magnetic Barkhausen Noise Method (Paper no: 478). "18th World Cong. for NDT, Durban-S.Africa", 1, (2012).
  A.53 Gür CH, Çam I, Investigating the Effects of Quenching and Tempering on Steel Microstructures by Magnetic Barkhausen Noise Method. "Proc of 6th Int Quenching and Control of Distortion Conf.", (2012), p.258-265.
  A.54 C H Gur, Nondestructive Determination of the Influence of Tempering Temperature on the Microstructure and Hardness of the Quenched AISI 4140 Steel by Measuring Magnetic Properties. "CD Proceedings 14th Asia Pacific Conf on NDT 18-22 Nov 2013-Mumbai", 1, (2013), p.CP30.
  A.55 Gür CH, Çam I, Erian G, Batıgün C, Non-Destructive Monitoring of Variations of Residual Stresses in Steel Weldment by Magnetic Barkhausen Noise. "ASME Pressure Vessels & Piping Conf. 14-18 July 2013 Paris - CD Proceedings of PVP2013", 1, (2013).
  A.56 Akcaoglu F U, Gür CH, Monitoring Magnetic Anisotropy Variations in Cold-Rolled Steel Sheets by Magnetic Barkhausen Noise Method. "11th European Conference on NDT", CD Proc, (2014).
  A.57 C. Hakan Gür, Improving the Design Component of Undergraduate Program in Metallurgical and Materials Engineering Department. "1st Asian Materials Education Symposium, 11-12 Dec 2014", (2014), p.58.
  A.58 C. Hakan Gür, Gökhan Erian, Caner Batıgün, İbrahim Çam, Monitoring the Effects of Subsequent Weld Runs on Surface Residual Stresses in Steel Plates by Magnetic Barkhausen Noise Method. "11th Int Conf on Barkhausen Noise & Micromagnetic Testing", 1, (2015).
  A.59 C. Hakan Gür, Serdar Savaş, Measuring the Surface Residual Stresses in Shot Peened Steel Components by Magnetic Barkhausen Noise Method. "11th Int Conf on Barkhausen Noise & Micromagnetic Testing", 1, (2015).
  A.60 Hüseyin Hızlı, C. Hakan Gür, Nondestructive Monitoring of the Effects of Carburizing on 19CrNi5H Steel by Magnetic Barkhausen Noise Method. "11th Int Conf on Barkhausen Noise & Micromagnetic Testing", 1, (2015).
  A.61 C.Hakan Gür, Applicability of Micromagnetic and Ultrasonic Methods for Non-Destructive Monitoring of Microstructure Variations in Steels Induced by Heat Treatment. "5th International Conf. on Distortion Engineering", 1, (2015), p.329-334.
  A.62 Hızlı H, Davut K, Şimşir C, Gür CH, Non-destructive Monitoring of Variations in Microstructure and Residual Stress in the Carburized Steel. "19th World Cong. for NDT 13-17 June 2016 Munich", (2016), p.Tu.2.C.1.
  A.63 Kaleli T, Gür CH, Non-Destructive Determination of Residual Stresses in the Spiral Submerged Arc Welded Steel Pipes. "19th World Congress for NDT 13-17 June 2016 Munich", (2016), p.Tu.1.C.3.
  A.64 Yalçın M, Yelbay HI, Gür CH, PoD Analysis of Phased Array and Conventional Ultrasonic Techniques. "19th World Congress for NDT, 13-17 June 2016 Munich", (2016), p.P150.
  A.65 Gür CH, Akçaoğlu FÜ, Monitoring the Directional Variations of Magnetic Barkhausen Emission in Ferritic Steel Sheets. "12th Int. Conf. on Barkhausen Noise and Micromagnetic Testing, 24-26 Sept 2017 Dresden", (2017).
  A.66 Gür CH, Nondestructive Characterization of Microstructures of Heat-Treated Steels by Magnetic Barkhausen Noise Technique. "Characterization of Minerals, Metals, and Materials, TMS, 26 Feb-02 March 2017 San Diego", (2017), p.371-376.
  A.67 Gür CH, Nondestructive Monitoring of Pearlite Degradation in Medium Carbon Steels by Magnetic Barkhausen Noise Method. "14th Int Conf. of Slovenian Soc. for NDT, 4-6 Sept 2017 Portoroz-Slovenia", (2017).
  A.68 Tan G, Kalay YE, Gür CH, The Effects of ECAP on the Precipitation Behaviour of Al 2024. "TMS 2017 San Diego, 26 Feb-02 March 2017", (2017).

Book and Chapter in a Book

  A.1 Caner Şimşir, C. Hakan Gür, Simulation of Quenching. "Handbook of Thermal Process Modelling of Steels", 1, (2009), p.341-425.
  A.2 Caner Şimşir, C. Hakan Gür, Chapter 17: Simulation of Quenching. "Quenching Theory and Technology", 1, (2010), p.605-667.

Publications (NATIONAL)

 

Journal Papers

  A.1 Gür, C.H., Çevre Yönetimi ve Sürdürülebilir Kalkınma. "Metalurji", 21, (1997), s.3-6.
  A.2 Gür, C.H., Tahribatsız Muayene Laboratuvarlarında Kalite Sistemi ve EN 45000'e göre Akreditasyon. "Metalurji", 22, (1998), s.39-43.
  A.3 Filiz Z, Batıgün C, Tansal M, Gür CH, Kaynak Tekniği ve Tahribatsız Muayene Personeli Eğitimi ve Belgelendirilmesi. "Mühendis ve Makina", 51, (2010), s.7-12.
  A.4 Tan E, Saraloğlu E, Gür CH, Aşırı Plastik Deformasyon ve Çökelme Sertleşmesi İşlemlerinin 2024 Alüminyum Alaşımının Özelliklerine Etkisi. "Metalurji", 155, (2010), s.33-41.
  A.5 Hüseyin Hızlı, Tuğçe Kaleli, C. Hakan Gür, Sementasyon İşlemi Uygulanan Çeliklerdeki Kalıntı Gerilmelerin Tahribatsız Tekniklerle Ölçülmesi. "Metalurji", (2016), s.30-35.
 

Conference Papers

  A.1 Gür, C.H., Tahribatsız Tekniklerin Malzeme Özelliklerinin Belirlenmesindeki Yeri. "1st Nondestructive Testing Symposium", 1, (1999), s.357-372.
  A.2 Gür, C.H., Kaynak Dikişlerinin Tahribatsız Muayenesinde Avrupa Standartları. "Welding Technology 2nd National Congress", 1, (1999), s.231-237.
  A.3 Gür, C.H. and Gümrükçüoğlu, M., Türkiye'de Tahribatsız Muayenenin Gelişimi ve Metalurji Mühendisleri Odası Tahribatsız Muayene Komisyonu. "1st International Nondestructive Testing Symposium", 1, (1999), s.3-14.
  A.4 Tuncer, B.O. and Gür, C.H., Isıl İşlem Uygulanan Çeliklerde Mikroyapı ve Ultrasonik Özellikler Arasındaki İlişki. "CD-Proc. of 2nd Int. NDT Symp", (2003).
  A.5 Sonat, F., Sarıoğlu, F., Gür, C.H., Aluminyum Alaşımında Yorulma Çatlaklarının. "6th Int. Fracture Conf.", (2003).
  A.6 Yıldız, İ., Gür, C.H., Yaşlandırma İşleminin 2024 Al-alaşımının Darbe Tokluğuna Etkisinin Tahribatsız Metotlarla İncelenmesi. "10. Denizli Materials Symposium", 1, (2004), s.455-461.
  A.7 Caner Batıgün, Zafer Filiz, Mehmet Tansal, C Hakan Gür, Kaynak Tekniği Alanında Çalışacak Uzman Personelin Uluslararası Mevzuata Uygun Biçimde Eğitimi ve Belgelendirilmesi. "Proc of Welding Technology 6. National Congress 9-10 Nov 2007 Ankara", 1, (2007), s.179-183.
  A.8 Serdar Savaş, C. Hakan Gür, Bilyeli dövme işlemi uygulanan çelik parçalarda kalıntı gerilme durumunun manyetik Barkhausen gürültü yöntemi ile tayini. "CD Proceedings 14th Int Metallurgy and Materials Cong, 16-18 Oct Istanbul", (2008), s.1498-1504.
  A.9 Sadık bayramoğlu, C. Hakan Gür, Ruslan Valiev, Igor Alexandrov, Characterization of ultra-fine grained steel samples produced by high pressure torsion via magnetic Barkhausen noise analysis. "CD Proceedings 14th Int Metallurgy and Materials Cong, 16-18 Oct Istanbul", (2008), s.195-200.
  A.10 Göktürk E. uzunçakmak, Evren Tan, C. Hakan Gür, DCAP işleminin 6061 Al-alaşımı şeritlerin mekanik özelliklerine etkisi. "CD Proceedings 14th Int Metallurgy and Materials Cong, 16-18 Oct Istanbul", (2008), s.158-163.
  A.11 Yelbay İ, Gür CH, Demiryolu raylarında Kalıntı Gerilmelerin Ölçümü. "CD Proceedings of 2. Int Railway Symposium 15-17 Oct 2008 Istanbul", (2008), s.961-968.
  A.12 Ebru Saraloğlu, Evren Tan, C. Hakan Gür, Eş kanallı açısal presleme ve yaşlandırma işlemlerinin 2024 Al-alaşımlarının mekanik özelliklerine etkisi. "CD Proceedings 14th Int Metallurgy and Materials Cong, 16-18 Oct Istanbul", (2008), s.15-20.
  A.13 Caner Şimşir, C. Hakan Gür, 3D FEM simulation of steel quenching. "CD Proceedings 14th Int Metallurgy and Materials Cong 16-18 Oct Istanbul", (2008), s.1306-1315.
  A.14 Bayramoğlu S, Savaş S, Yelbay İ, Gür CH, Non-destructive Evaluation of Railroad Rails. "CD Proceedings of 2. Int Railway Symposium 15-17 Oct 2008 Istanbul", (2008), s.951-960.
  A.15 Davut K, Gür CH, Manyetik Barkhausen Gürültüsü Yöntemi ile Çeliklerde İçyapı Karakterizasyonu. "Proc. of 3rd Int NDT Symposium 17-19 April 2008 Istanbul", (2008), s.224-237.
  A.16 Kibar AA, Uzunçakmak GE, Tan E, Gür CH, 6061 Al Alaşımı İnce Plakaların Mukavemetinin Aşırı Plastik Deformasyonla İyileştirilmesi. "4. Aluminyum Sempozyumu", 1, (2009), s.265-269.
  A.17 Maradit P, Şimşir C, Lübben T, Gür CH, Sertleştirilen Çelik Parçalardaki Şekil Bozulmalarının Boyut Analizi ile Öngörülmesi. "3. Isıl İşlem Sempozyumu 14-15 Kasım 2009", 1, (2009), s.246-253.
  A.18 Filiz Z, Batıgün C, Tansal M, Gür CH, Kaynak Tekniği ve Tahribatsız Muayene Personeli Eğitimi ve Belgelendirilmesi. "7. Ulusal Kaynak Teknolojisi Kongresi Bildiriler Kitabı", 1, (2009), s.23-30.
  A.19 Filiz Z, Batıgün C, Tansal M, Gür CH, Kaynak Tekniği Alanında İhtiyaç Duyulan Vasıflı Elemanların Eğitimi ve Belgelendirilmesi. "1. Uluslararası Kaynak Teknolojileri Konferansı", 1, (2009), s.717-722.
  A.20 Yelbay İ, Çam İ, Gür CH, Kaynaklı Plakalarda Kalıntı Gerilimlerin Manyetik Barkhausen Gürültüsü Yöntemiyle Ölçülmesi. "1. Uluslararası Kaynak Teknolojileri Konferansı", 1, (2009), s.512-523.
  A.21 Kolankaya O, Yelbay İ, Doyum B, Gür CH, Kaynakların Tahribatsız Muayenesi. "1. Uluslararası Kaynak Teknolojileri Konferansı", 1, (2009), s.698-709.
  A.22 Tan E, Kibar AA, Gür CH, 6061 Al-Alaşımı Plakaların Değişik Kanallı Açısal Presleme Yöntemiyle Aşırı Plastik Deformasyonu. "CD Proc 15th Int Metallurgy & Materials Cong, 11-13 Nov 2010, Istanbul", (2010), s.1062-1070.
  A.23 Savaş S, Gür CH, Bilyeli Dövme Uygulanmış Çelik Parçalarda Yüzey Kalıntı Gerilmelerinin Mikro-Manyetik Yöntemle Tahribatsız Olarak Ölçülmesi. "CD Proc 15th Int Metallurgy & Materials Cong, 11-13 Nov 2010, Istanbul", (2010), s.500-508.
  A.24 Simon A, Tan E, Gür CH, Pieczonka T, Gacsi Z, Investigating the Correlation between the Porosity, Wear Resistance and the Production Method of Al-SiCp Composites. "CD Proceedings of the 15th Int Metallurgy & Materials Congress", (2010), s.283-289.
  A.25 Maradit BP, Şimşir C, Lübben T, Gür CH, Gazla Hızlı Soğutulan Çeliklerdeki Şekil Bozulmasının Boyut Analizi ile İncelenmesi. "CD Proc 15th Int Metallurgy & Materials Cong, 11-13 Nov 2010, Istanbul", (2010), s.1727-1736.
  A.26 Kara Z, Çam İ, Gür CH, Abramova M, Alexandrov I, Characterization of Equal Channel Angular Pressed AISI 1020 Steels by Magnetic Barkhausen Noise Analysis. "CD Proc 15th Int Metallurgy & Materials Cong, 11-13 Nov 2010, Istanbul", (2010), s.551-560.
  A.27 G. Kotan, E. Tan, Y.E. Kalay, C.H. Gur, EKAP uygulamış Aluminyum Alaşımı Tane Sınırlarının Yüksek Çözünürlüklü Geçirimli Elektron Mikroskopi Yöntemleriyle İncelenmesi. "Ulusal Elektron Mikroskopi Kongresi", (2011).
  A.28 Tolungüç B, Yurtışık K, Tirkeş S, Gürbüz R, Gür CH, Batıgün C, Ertürk T, 2205 Dubleks Paslanmaz Çeliklerin Hibrit Plazma Ark Kaynaklı Birleştirmelerinde Mikroyapı Dönüşümleri. "Bildiriler Kitabı, 8. Ulusal Kaynak Teknolojisi Kongresi, 18-19 Kasım 2011", (2011), s.185-192.
  A.29 Akçaoğlu FÜ, Gür CH, Prediction of Texture Formation in Cold Rolled Steels by Magnetic Barkhausen Noise Method. "16th Int. Metallurgical & Materials Congress CD-Proc.", (2012), s.1179-1185.
  A.30 Kotan G., Tan E, Kalay E, Gür CH, Investigation of the Precipitation Mechanisms in Severely Deformed and Aged 2024 Aluminum Alloy. "16th Int. Metallurgical & Materials Congress CD-Proc. - Sept 2012 Istanbul", (2012), s.1203-1210.
  A.31 Mofid MA, Abdollah-zadeh A, Ertürk MT, Gür CH, Submerged Friction Stir Welding of Al- and Mg-alloys: A New Method to Minimize Formation of Intermetallics. "Proc 2nd Int Welding Tech Conf.", (2012), s.184-189.
  A.32 Erian G, Batıgün C, Çam I, Gür CH, Investigating the Effect of Number of Weld Passes on the Residual Stress State of Steel Plates by Micro-Magnetic Method. "16th Int Metallurgical & Materials Congress CD-Proc.", (2012), s.903-911.
  A.33 C H Gür, Su Verilen ve Temperlenen Çeliklerde İçyapının Tahribatsız Yöntemlerle Karakterizasyonu: Ultrasonik ve Mikro-Manyetik Yöntemler. "Proc. of 4th Heat Treatment Symp. 24-25 Oct 2013, Istanbul", 1, (2013), s.99-109.
  A.34 Garipova N, Batıgün C, Gür CH, Determination of Residual Stress Field on a Multi-Pass Welded Butt-Joint by Finite Element Modeling. "17th Int. Metallurgical & Materials Cong.", CD Proc, (2014), s.380-388.
  A.35 Gür CH, Estimation of Residual Stresses in Steel Components by Magnetic Barkhausen Noise Technique: Welding and Shot-Peening. "17th Int. Metallurgical & Materials Cong.", CD Proc, (2014), s.354-360.
  A.36 Müştak O, Davut K, Şimşir C, Gür CH, Determination of Flow Curves of Metastable Austenite. "17th Int. Metallurgical & Materials Cong.", CD Proc, (2014), s.464-470.
  A.37 Elif Bedir, Caner Batıgün, C. Hakan Gür, S235 Çeliğinin MAG Köşe Kaynağında Farklı Sabitleme Noktalarına Bağlı Gelişen Çarpılma Eğilimlerinin Sonlu Elemanlar Yöntemi ile Tahmin Edilmesi. "9. Ulusal Kaynak teknolojisi Kongresi", (2015), s.191-207.
  A.38 H. İlker Yelbay, C. Hakan Gür, Demiryolu raylarında Kalıntı Gerilimlerin Manyetik Barkhausen Gürültüsü Yöntemi ile Ölçülmesi. "9. Ulusal Kaynak Teknolojisi Kongresi", 1, (2015), s.301-307.
  A.39 Hızlı H, Kaleli T, Gür CH, Measurement of Residual Stresses in the Carburized Steels by Non-Destructive Techniques. "18th Int. Metallurgy & Materials Cong., 29 Sept-01 Oct 2016 Istanbul", CD Proc, (2016), s.439-442.
  A.40 Çağırıcı M, Tosun U, Ertürk MT, Gür CH, Effect of Microstructure on Fracture Toughness of Coarse-Grain Heat Affected Zone in As-Welded X70M Steel. "18th Int. Metallurgy & Materials Congress, 29 Sept-01 Oct 2016 Istanbul", CD Proc, (2016), s.928-931.
<< back